Accessories for swimming pool luminaires

Distribution boxes for installation in floor and wall surfaces. For installing the cables of swimming pool luminaires in protection class III.

Protection class IP 67

Stainless steel cover · Material No. 1.4301 · electropolished Housing made of glass fibre reinforced synthetic material 2 screw cable glands 1 lateral hose connection for soft PVC protective hose Ø 20 x 3.0 mm

After installation, the distribution box must be sealed with a sealing compound!

71 134 Protection class IP 65 Input voltage: AC: 198-264 50-60 Hz DC: 176-275 V Output voltage: 24 V DC

Glass fibre reinforced synthetic material Safety power supply according to EN 61347-2-13

Glass fibre reinforced synthetic material Sicherheitsnetzteil nach EN 61347-2-13

71 300 · 71 301 · 71 307 Input voltage: 90 – 305 V AC 50 – 60 Hz Output voltage: 24 V DC · 0 – 320 W 

Protection class IP 65 Housing made of synthetic material Safety power supply unit according to EN 61347-2-13

71 302 The BEGA Safety Transceiver enables the separation and conversion of a DALI signal into a DATA signal required for swimming pool luminaires and underwater floodlights. Up to 64 luminaires can be integrated into a system and used in groups and scenes.

When making the recessed opening, it is advisable to use an installation housing.

Our installation housings are specially adapted to BEGA luminaires and allow technically perfect installation in walls.

Hose end screw connection to seal off soft PVC protective hoses with diameter 20 x 3 mm, which are used for the routing of cables for swimming pool luminaires. Stainless steel · Material No. 1.4401 1 connecting pipe for the soft PVC protective hose with diameter 20 x 3 mm Pipe length 29 mm 1 PG 16 screw cable gland with gasket inserts for connecting cable with diameter 5 – 13 mm 1 hose clamp DIN 3017 Bandwidth 9 mm · Tensioning range 20 – 32 mm