was added to the project list.
×

Bollards

Asymmetrical shielded light distribution


The light from these luminaires is directed downwards and fully shielded above the horizontal. The highest degree of illuminance is achieved in the immediate vicinity of the luminaire. Luminaires with a high level of visual comfort for the uniform illumination of footpaths and surfaces with maximum glare suppression.

Share

Protection class  IP 65
BEGA Thermal Management ®

Cast aluminium, aluminium and stainless steel
Safety glass
Reflector made of pure anodised aluminium

84 414  Connection box with terminals 3 x 4
84 415  Connection box 70 632

20-year availability guarantee for LED modules

BEGA bollards are bolted with a mounting plate onto a foundation provided by the customer or an anchorage unit made of hot-dip galvanised steel. Anchorage units are accessories and must be ordered separately.

The luminaire luminous flux and the luminaire connected wattage quoted in the table may change as a result of technical progress. On our website you will find data sheets with information on each luminaire concerning not only the current values but also the LED service life and the luminous flux in relation to the respective colour temperature.

Luminaire colour graphite

Planning examples

On the basis of our empirical values and the suggestions of architects and planners, we have compiled room situations for which lighting design is frequently required. In the following, we shall present possible illumination solutions for these architectural situations. It goes without saying that all technical lighting standards are complied with. In some cases, the degree of illuminance proposed by us may even exceed the standard. For us, the aesthetics of light and a high level of visual comfort are important criteria for such decisions. At the same time, the form and the size of the luminaires must fit into the architectural surroundings. For example, we often recommend larger models if a structure has large dimensions – even if smaller luminaires with lower output would be enough. In such cases, the degree of illuminance can be reduced to a suitable level by means of a light control system.


Park

A walk through a park: The pedestrian walkway is flanked by LED bollards, whose unshielded light illuminates the path uniformly. An arrangement of luminaires along the edge of the path with spacing of 5.5 m apart is chosen for this. The bushes and trees are illuminated from the ground. For a homogeneous impression, large trees are illuminated with two in-ground luminaires. The colour temperature...

learn more


LED colour temperature
  LED Power supply unit A B C AC/DC
84 414 K3   4.0 W 266 lm on/off 160 800 110
84 415 K3   13.5 W 1113 lm DALI controllable 270 1000 120
no longer included in the current catalogue new in the range