was added to the project list.

Connecting pillars for the electrical power supply in the private sector

Permanent · With anchorage unit or with screw-on base

Like public areas, private gardens also require many electrical connection options for luminaires and other electrical equipment. For our portable luminaires we can offer you matching connecting pillars with safety sockets for the house and garden with anchorage units or with screw-on bases.

Connecting pillars are available with two or three safety sockets.
Optionally with type F, type E or type G safety sockets.
• Type F: system common in Germany and Europe
• Type E: system common in France and Belgium
• Type G: system used in Great Britain (“Commonwealth plug”)

Protection class  IP 44

Cast aluminium, aluminium, stainless steel
Glass fibre reinforced synthetic material
Line connector 3 x 2.5

• With anchorage unit made of hot-dip galvanised steel
• With screw-on base for mounting on foundations

National safety regulations must be observed when installing and operating these connecting pillars. Earth fault circuit breakers and fuses must be connected on line side in the sub-main distribution circuit.

If through-wiring to a further connecting pillar is required, we recommend using distribution box 70 730.

Colour graphite

Connecting pillars with 3 safety sockets 
  A B C
71 076   with anchorage unit 110 500 75
71 078   with screw-on base 110 500 75
Permanent connecting pillars with 3 safety sockets Type F 
  A B C
71 077   with anchorage unit 110 600 75
71 079   with screw-on base 110 600 75
no longer included in the current catalogue new in the range