Drive-over in-ground luminaires

For installation in ground surfaces


A series for a wide range of applications where lighting from the ground is required – indoors and out. Depending on on-site requirements, the luminaires can be installed using recessed housings or left “floating” in gravel, lawns, flower beds or paved areas, for example. If the luminaires are to be used with an installation housing, a foundation with drainage must be provided by the customer. The luminaires’ stainless steel housings conform to the highest standards, as does the overall quality of all components. In terms of lighting technology, this series is characterised by an extensive range of different light characteristics.

Installation housings are available as accessories for these floodlights. Please order accessories separately.

The luminaires can be driven over by vehicles with pneumatic tyres.

more

Pressure load 2000 kg
Size Ø 145 · 205 · 245 · 330 mm
Protection class IP 68 · 10 m

BEGA Thermal Management ®

Trim ring and luminaire housing made of stainless steel
Safety glass
Reflector surface made of pure aluminium

BEGA Ultimate Driver ® on/off or DALI-controllable

Inclination angle of the reflector adjustable from 0° to 30°, optical system rotatable through 360°

Integrated water stop and connecting cable

BEGA Hybrid Optics ®

The RGB W luminaires in this series can be controlled by DALI colour light control (DT 8, RGBWAF, xy, TC).

When the glass is wet, there may be a risk of slipping. For walkable public areas, we recommend skid-blocking glass in accordance with DIN 51130 R 13. With the additional specification R after the article number, we can supply all luminaires with skid-blocking glass. This increases the dispersion of the light distribution.

On request, the luminaires are available in the light colours green, blue, amber and red.

20-year availability guarantee for LED modules

B = Ø recessed opening

The luminaire luminous flux and the luminaire connected wattage quoted in the table may change as a result of technical progress. On our website you will find data sheets with information on each luminaire concerning not only the current values but also the LED service life and the luminous flux in relation to the respective colour temperature.

Planning examples

On the basis of our empirical values and the suggestions of architects and planners, we have compiled room situations for which lighting design is frequently required. In the following, we shall present possible illumination solutions for these architectural situations. It goes without saying that all technical lighting standards are complied with. In some cases, the degree of illuminance proposed by us may even exceed the standard. For us, the aesthetics of light and a high level of visual comfort are important criteria for such decisions. At the same time, the form and the size of the luminaires must fit into the architectural surroundings. For example, we often recommend larger models if a structure has large dimensions – even if smaller luminaires with lower output would be enough. In such cases, the degree of illuminance can be reduced to a suitable level by means of a light control system.


Advertising space

The illumination of advertising spaces repeatedly presents new challenges. A change in motif from a very light to a dark motif, or vice versa, requires an adjustment of the degree of illuminance for the advertising to be effective. In this case, a control unit for the luminaires is strongly recommended in order to provide numerous options for illuminating advertising posters. In the following...

learn more


Commercial building entrance

The covered area in front of a commercial building is illuminated from a great height with efficient downlights. The focus is placed on the square pillars supporting the roof using very narrow beam in-ground floodlights on the front side. On the sides and at the rear, they benefit from the light of the downlights. A roof panel projecting over the entrance is fitted with recessed ceiling luminaires...

learn more


Park

A walk through a park: The pedestrian walkway is flanked by LED bollards, whose unshielded light illuminates the path uniformly. An arrangement of luminaires along the edge of the path with spacing of 5.5 m apart is chosen for this. The bushes and trees are illuminated from the ground. For a homogeneous impression, large trees are illuminated with two in-ground luminaires. The colour temperature...

learn more


LED colour temperature
Glass surface
Location luminaires 
LED ta Power supply unit β A B C AC/DC
 
Floodlights · Symmetrical wide beam light distribution 
LED ta Power supply unit β A B C AC/DC
 
 
 
 
Floodlights · Symmetrical very wide beam light distribution 
LED ta Power supply unit β A B C AC/DC
 
 
Wallwasher · Asymétrique-extensive light distribution 
LED ta Power supply unit β A B C AC/DC
 
 
Floodlights · adjustable focused light distribution 
LED ta Power supply unit β A B C AC/DC
 
Floodlights · adjustable wide beam light distribution 
LED ta Power supply unit β A B C AC/DC
 
 
Floodlights · adjustable very wide beam light distribution 
LED ta Power supply unit β A B C AC/DC
 
 
RGB W floodlights · adjustable wide beam light distribution 
LED ta Power supply unit β A B C AC/DC
 
RGB W floodlights · adjustable very wide beam light distribution 
LED ta Power supply unit β A B C AC/DC
no longer included in the current catalogue new in the range

Drive-over in-ground luminaires in use

Slider
Neuhaus Castle Stables, Paderborn Learn more
Slider
Energy, Education and Experience Centre (EEZ), Aurich Learn more