was added to the project list.

Drive-over LED in-ground luminaires

With small dimensions for flush-mounting installation · Location luminaires or floodlights

LED in-ground luminaires with a luminaire housing made of cast stainless steel. Luminaires with small dimensions for flush-mounting installation in paved ground surfaces both indoors and out.

The luminaires are mounted in a housing made of cast stainless steel on a foundation provided by the customer that absorbs the pressure loads. The luminaires can be driven over by vehicles with pneumatic tyres. The luminaires must not be used in areas where they are exposed to horizontal loads caused by braking, accelerating and changes of direction.

Pressure load 2000 kg
Material Stainless steel · Cast stainless steel
Installation depth 60 · 100 mm
Protection class IP 68 · 10 m
Size 75 · 115 mm

BEGA Thermal Management ®

Trim ring made of stainless steel
Luminaire housing made of cast stainless steel
Safety glass
Reflector made of pure anodised aluminium
Water stop · Connecting cable

20-year availability guarantee for LED modules

A separate 24 V DC power supply unit with A = 75 mm is required to operate the luminaires.

On request, the luminaires are available in the light colours green, blue, amber and red.

The luminaire luminous flux and the luminaire connected wattage quoted in the table may change as a result of technical progress. On our website you will find data sheets with information on each luminaire concerning not only the current values but also the LED service life and the luminous flux in relation to the respective colour temperature.

Planning examples

On the basis of our empirical values and the suggestions of architects and planners, we have compiled room situations for which lighting design is frequently required. In the following, we shall present possible illumination solutions for these architectural situations. It goes without saying that all technical lighting standards are complied with. In some cases, the degree of illuminance proposed by us may even exceed the standard. For us, the aesthetics of light and a high level of visual comfort are important criteria for such decisions. At the same time, the form and the size of the luminaires must fit into the architectural surroundings. For example, we often recommend larger models if a structure has large dimensions – even if smaller luminaires with lower output would be enough. In such cases, the degree of illuminance can be reduced to a suitable level by means of a light control system.

Historical façade

Various different luminaires are used to illuminate historical façades. Beginning on the ground floor, arcades are illuminated with in-ground floodlights. Here it is important to make sure that the luminaires can stand up to being driven over by car tyres. Depending on the version of the luminaires, pressure loads of up to 5000 kg are possible. Between the floors, the house has ledges from where...

learn more

LED colour temperature
Location luminaires 
LED Power supply unit β A B C AC/DC
77 027 K3 0.8 W 27 lm without · 24 V DC 75 45 x 92 60
77 028 K3 2.7 W 74 lm on/off 115 80 x 130 100
Floodlights · symmetrical 
LED Power supply unit β A B C AC/DC
77 017 K3 1.5 W 139 lm without · 24 V DC 44° 75 45 x 92 60
77 018 K3 4.6 W 343 lm on/off 26° 115 80 x 130 100
Floodlights · asymmetrical 
LED Power supply unit β A B C AC/DC
77 019 K3 4.6 W 362 lm on/off 34/35° 115 80 x 130 100
no longer included in the current catalogue new in the range