Drive-over LED in-ground luminaires

For installation in ground surfaces · Location luminaires or floodlights


An extensive and efficient series of LED in-ground luminaires for use both indoors and out. Different light characteristics and light outputs are available for your planning work. The entire luminaire housings are made of stainless steel.Depending on the installation situation, the luminaires can be installed using installation housings or simply “floating” in gravel, lawns, flowerbeds or paved surfaces, for example.

The luminaires in this series can be driven over by vehicles with pneumatic tyres. The luminaires must not be used in areas where they are exposed to horizontal loads caused by braking, accelerating and changes of direction.

Pressure load 2000 kg
Material Stainless steel
Protection class IP 68 · 10 m
Installation depth 80 - 225 mm
Size Ø 145 - 330 mm

BEGA Thermal Management ®

Trim ring and luminaire housing made of stainless steel
Safety glass
Floodlights with reflectors made of pure anodised aluminium
Water stop · Connecting cable
77005 · 77006 · 77007 · 77040 Integrated louvre for lateral glare suppression

Luminaires with on/off power supply unit or DALI controllable power supply unit

20-year availability guarantee for LED modules

If the luminaires are to be used with an installation housing, a foundation with drainage must be provided by the customer.

The RGB W luminaires can be controlled by DALI colour light control (DT 8, RGBWAF, xy). We recommend our BEGA Control system for this purpose.

When the glass is wet, there may be a risk of slipping. For walkable public areas, we recommend skid-blocking glass in accordance with DIN 51130 R 13. All luminaires with an additional R after the order number are supplied with skid-blocking glass. This increases the dispersion of the light distribution.

B = Ø recessed opening

On request, the luminaires are available in the light colours green, blue, amber and red.

The luminaire luminous flux and the luminaire connected wattage quoted in the table may change as a result of technical progress. On our website you will find data sheets with information on each luminaire concerning not only the current values but also the LED service life and the luminous flux in relation to the respective colour temperature.

Planning examples

On the basis of our empirical values and the suggestions of architects and planners, we have compiled room situations for which lighting design is frequently required. In the following, we shall present possible illumination solutions for these architectural situations. It goes without saying that all technical lighting standards are complied with. In some cases, the degree of illuminance proposed by us may even exceed the standard. For us, the aesthetics of light and a high level of visual comfort are important criteria for such decisions. At the same time, the form and the size of the luminaires must fit into the architectural surroundings. For example, we often recommend larger models if a structure has large dimensions – even if smaller luminaires with lower output would be enough. In such cases, the degree of illuminance can be reduced to a suitable level by means of a light control system.


Advertising space

The illumination of advertising spaces repeatedly presents new challenges. A change in motif from a very light to a dark motif, or vice versa, requires an adjustment of the degree of illuminance for the advertising to be effective. In this case, a control unit for the luminaires is strongly recommended in order to provide numerous options for illuminating advertising posters. In the following...

learn more


Commercial building entrance

The covered area in front of a commercial building is illuminated from a great height with efficient downlights. The focus is placed on the square pillars supporting the roof using very narrow beam in-ground floodlights on the front side. On the sides and at the rear, they benefit from the light of the downlights. A roof panel projecting over the entrance is fitted with recessed ceiling luminaires...

learn more


Park

A walk through a park: The pedestrian walkway is flanked by LED bollards, whose unshielded light illuminates the path uniformly. An arrangement of luminaires along the edge of the path with spacing of 5.5 m apart is chosen for this. The bushes and trees are illuminated from the ground. For a homogeneous impression, large trees are illuminated with two in-ground luminaires. The colour temperature...

learn more


LED colour temperature
Glass surface
Location luminaires 
LED Power supply unit β A B C AC/DC
 
Floodlights · symmetrical 
LED Power supply unit β A B C AC/DC
 
Floodlights · asymmetrical 
LED Power supply unit β A B C AC/DC
 
Floodlights · asymmetrical with integrated diffusor · wallwasher 
LED Power supply unit β A B C AC/DC
 
Floodlights · Adjustable inclination angle 0° to 30°/ vertical axis ±180° 
LED Power supply unit β A B C AC/DC
 
RGB W floodlights · adjustable inclination angle 0° to 30°/ vertical axis ±180° 
LED Power supply unit β A B C AC/DC
no longer included in the current catalogue new in the range

Drive-over LED in-ground luminaires in use

Slider
The winery Delas Frères, Tain-l’Hermitage Learn more
Slider
Neuhaus Castle Stables, Paderborn Learn more
Slider
Energy, Education and Experience Centre (EEZ), Aurich Learn more
Slider
Schloss Montabaur, Germany Learn more
Slider
Villa in Unna, Germany Learn more
Slider
Villa in Essen-Bredeney, Germany Learn more
Slider
Villa in Essen-Bredeney, Germany Learn more
Slider
The Museum of Art, Architecture and Technology, Lisbon Learn more
Slider
RheinEnergie, Cologne Learn more
Slider
Château d’Aigle, Lake Geneva Learn more
Slider
Château d’Aigle, Lake Geneva Learn more
Slider
Civic Centre, Geisingen Learn more
Slider
Siloah Clinic, Hannover Learn more
Slider
Limes Gate, Dalkingen Learn more
Slider
Clinic, Nürtingen Learn more
Slider
City of Culture, Santiago de Compostela Learn more
Slider
EYE Film Museum, Amsterdam Learn more