was added to the project list.
×

Drive-over LED in-ground luminaires

With small dimensions for illuminating ground surfaces


In-ground luminaires with small dimensions for illuminating ground surfaces both indoors and out. Optionally available with one or four light sectors for different lighting situations.

Before the luminaires are installed, the customer must lay a foundation that will absorb the pressure load of the luminaires.

The luminaires can be driven over by vehicles with pneumatic tyres. The luminaires must not be used in areas where they are exposed to horizontal loads caused by braking, accelerating and changes of direction.

Share

Pressure load 1000 kg
Material Stainless steel · Cast aluminium
Protection class IP 67
Installation depth 95 mm
Size Ø 120 mm

BEGA Thermal Management ®

Luminaire cover made of cast aluminium
Luminaire housing made of cast stainless steel and stainless steel
Silicate glass
Water stop · Connecting cable

20-year availability guarantee for LED modules

On request, the luminaires are available in the light colours green, blue, amber and red.

The luminaire luminous flux and the luminaire connected wattage quoted in the table may change as a result of technical progress. On our website you will find data sheets with information on each luminaire concerning not only the current values but also the LED service life and the luminous flux in relation to the respective colour temperature.

Luminaire colour graphite

LED colour temperature
1 light sector 60° 
  LED Power supply unit A B C D AC/DC
88 671 K3   2.2 W 24 lm on/off Ø 120 90 x 90 95 30
 
1 light sector 180° 
  LED Power supply unit A B C D AC/DC
88 673 K3   4.3 W 67 lm on/off Ø 120 90 x 90 95 30
 
4 light sectors, each 60° 
  LED Power supply unit A B C D AC/DC
88 675 K3   6.0 W 92 lm on/off Ø 120 90 x 90 95 30

Drive-over LED in-ground luminaires in use