Drive-over on-ground luminaires

For installation on the ground to illuminate ground surfaces


The construction principle of these luminaires provides a solution for numerous lighting applications on flat ground surfaces. The significantly lower installation costs compared to recessed luminaires and the different installation variants reduce installation costs and offer a high degree of flexibility. The luminaires are simply fixed to the substrate with a mounting plate. A hole drilled under the luminaire by the customer is required for the cable routing.

We offer a connection housing as an accessory for different requirements at the installation site. This allows the luminaires to be mounted on unpaved surfaces. Provided the load-bearing capacity of the floor is sufficient, the pressure load-bearing capacity is 1000 kg.

The luminaires can be driven over by vehicles with pneumatic tyres.

more

Pressure load 1000 kg
Size Ø 160 · 270 mm
Protection class IP 67

BEGA Thermal Management ®

Cast aluminium and stainless steel
BEGA Unidure ® coating technology
Borosilicate glass
Reflector made of pure anodised aluminium

Luminaires without power supply unit or on/off power supply unit

Integrated water stop and connecting cable

A separate 24 V DC power supply unit is required to operate luminaires 77 069 and 77 070.

On request, the luminaires are available in the light colours green, blue, amber and red.

20-year availability guarantee for LED modules

The luminaire luminous flux and the luminaire connected wattage quoted in the table may change as a result of technical progress. On our website you will find data sheets with information on each luminaire concerning not only the current values but also the LED service life and the luminous flux in relation to the respective colour temperature.

Luminaire colour graphite

Planning examples

On the basis of our empirical values and the suggestions of architects and planners, we have compiled room situations for which lighting design is frequently required. In the following, we shall present possible illumination solutions for these architectural situations. It goes without saying that all technical lighting standards are complied with. In some cases, the degree of illuminance proposed by us may even exceed the standard. For us, the aesthetics of light and a high level of visual comfort are important criteria for such decisions. At the same time, the form and the size of the luminaires must fit into the architectural surroundings. For example, we often recommend larger models if a structure has large dimensions – even if smaller luminaires with lower output would be enough. In such cases, the degree of illuminance can be reduced to a suitable level by means of a light control system.


Living area

Open living area with a ceiling height of 5.5 m. A glass front provides a clear view of the adjacent terrace area. Recessed ceiling luminaires shining downwards are responsible for the basic illumination. On the far side, wall luminaires ensure pleasant background light. These luminaires emit glare-free light upwards and downwards, so that through their group arrangement the entire wall is...

learn more


LED colour temperature
1 light sector 180° 
LED Power supply unit A B AC/DC
 
1 light sector 360° 
LED Power supply unit A B AC/DC
no longer included in the current catalogue new in the range

Drive-over on-ground luminaires in use

Slider
Villa M, Berlin Learn more