Façade floodlights

Symmetrical or asymmetrical light distribution


We have developed a linear façade floodlight in two lengths, specially designed for the wide-area illumination of partial or entire façades. The floodlights on this page are available in two colour temperatures, 3000 K or 4000 K, with symmetrical or asymmetrical light distribution.

BEGA façade floodlights can be installed side by side to form a continuous light strip. The electrical connection to the next luminaire is established using convenient and easy-to-use five-pole plug connectors. We offer connection cables in various lengths for bridging larger distances.

Protection class IP 65
BEGA Thermal Management ®

Cast aluminium, aluminium and stainless steel
BEGA Unidure ® coating technology
Safety glass
Reflector made of pure anodised aluminium

DALI-controllable power supply units

The connection cables can also be used as maintenance cables.
The luminaires can be controlled via DALI colour light control (DT 8, RGBWAF, xy).

Please note:
A separate connection box is required for the electrical connection to the luminaires. If the luminaires are connected in series (max. 12 luminaires per connection), a connection box is only required for the first luminaire. For installation with wall outrigger arms please order connection box 71 064. Connection boxes are accessories and must be ordered separately. The connection from one luminaire to another is made with the connection cables supplied with the luminaires.

20-year availability guarantee for LED modules

The luminaire luminous flux and the luminaire connected wattage quoted in the table may change as a result of technical progress. On our website you will find data sheets with information on each luminaire concerning not only the current values but also the LED service life and the luminous flux in relation to the respective colour temperature.

Planning examples

On the basis of our empirical values and the suggestions of architects and planners, we have compiled room situations for which lighting design is frequently required. In the following, we shall present possible illumination solutions for these architectural situations. It goes without saying that all technical lighting standards are complied with. In some cases, the degree of illuminance proposed by us may even exceed the standard. For us, the aesthetics of light and a high level of visual comfort are important criteria for such decisions. At the same time, the form and the size of the luminaires must fit into the architectural surroundings. For example, we often recommend larger models if a structure has large dimensions – even if smaller luminaires with lower output would be enough. In such cases, the degree of illuminance can be reduced to a suitable level by means of a light control system.


Advertising space

The illumination of advertising spaces repeatedly presents new challenges. A change in motif from a very light to a dark motif, or vice versa, requires an adjustment of the degree of illuminance for the advertising to be effective. In this case, a control unit for the luminaires is strongly recommended in order to provide numerous options for illuminating advertising posters. In the following...

learn more


Historical building

For the illumination of the building with floodlights, the aim is to illuminate all sides of the complex as uniformly as possible. An obvious solution is to position the high-performance floodlights symmetrically at the corners of the building. In most cases, one floodlight position is sufficient for two sides of the building. The floodlights are frequently fitted with louvres or shields to...

learn more


Historical façade

Various different luminaires are used to illuminate historical façades. Beginning on the ground floor, arcades are illuminated with in-ground floodlights. Here it is important to make sure that the luminaires can stand up to being driven over by car tyres. Depending on the version of the luminaires, pressure loads of up to 5000 kg are possible. Between the floors, the house has ledges from where...

learn more


Finish
LED colour temperature
Symmetrical narrow beam light distribution 
LED Power supply unit β A B C AC/DC
 
Symmetrical narrow beam light distribution · RGB W 
LED Power supply unit β A B C AC/DC
 
Symmetrical narrow beam light distribution · Tunable White · 2700 K - 6500 K 
LED Power supply unit β A B C AC/DC
 
Symmetrical wide beam light distribution 
LED Power supply unit β A B C AC/DC
 
Symmetrical wide beam light distribution · RGB W 
LED Power supply unit β A B C AC/DC
 
Symmetrical wide beam light distribution · Tunable White · 2700 K - 6500 K 
LED Power supply unit β A B C AC/DC
 
Asymmetrical light distribution 
LED Power supply unit β A B C AC/DC
 
Asymmetrical light distribution · RGB W 
LED Power supply unit β A B C AC/DC
 
Asymmetrical light distribution · Tunable White · 2700 K - 6500 K 
LED Power supply unit β A B C AC/DC
no longer included in the current catalogue new in the range

Façade floodlights in use

Slider
University of Natural Resources, Vienna Learn more