0
0
Watch list
was added to the project list.
×

LED bollards

Flat beam light distribution


Shielded LED bollards with flat beam light distribution on one side.Luminaires which illuminate the ground surfaces directly in front of their installation site with a flat beam.

Their light distribution allows the luminaires to be spaced far apart and is particularly suitable for illuminating footpaths and squares.

We can supply these luminaires in different heights for the differing dimensions of the installation site.

Share

Protection class  IP 65

Cast aluminium, aluminium and stainless steel
Safety glass
Reflector made of pure anodised aluminium

Connection box with terminals 5 x 2.5

BEGA bollards are bolted with a mounting plate onto a foundation provided by the customer or an anchorage unit made of hot-dip galvanised steel.
The mounting system can be used to align the luminaire.

The luminaire luminous flux and the luminaire connected wattage quoted in the table might change as a result of technical progress. On our website you will find data sheets with information on each luminaire concerning not only the current values but also the LED service life and the luminous flux in relation to the respective colour temperature.

Planning examples

On the basis of our empirical values and the suggestions of architects and planners, we have compiled room situations for which lighting design is frequently required. In the following, we shall present possible illumination solutions for these architectural situations. It goes without saying that all technical lighting standards are complied with. In some cases, the degree of illuminance proposed by us may even exceed the standard. For us, the aesthetics of light and a high level of visual comfort are important criteria for such decisions. At the same time, the form and the size of the luminaires must fit into the architectural surroundings. For example, we often recommend larger models if a structure has large dimensions – even if smaller luminaires with lower output would be enough. In such cases, the degree of illuminance can be reduced to a suitable level by means of a light control system.


Park

A walk through a park: The pedestrian walkway is flanked by LED bollards, whose unshielded light illuminates the path uniformly. An arrangement of luminaires along the edge of the path with spacing of 5.5 m apart is chosen for this. The bushes and trees are illuminated from the ground. For a homogeneous impression, large trees are illuminated with two in-ground luminaires. The colour temperature...

learn more


Finish
LED colour temperature
  LED A B AC/DC
99 056 K3   13.8 W 1361 lm Ø 190 550
99 058 K3   14.0 W 1361 lm Ø 190 1000