was added to the project list.

LED ceiling and wall luminaires

Ceiling and wall luminaires whose luminaire housing at the same time forms the surrounding shield. These luminaires are characterised by the contrasting effect between the shield, the opal glass and the installation surface. Some of the light exits behind the shield and also illuminates the mounting surface. Depending on the colour of the installation surface, this creates an impressive light effect.

Three luminaire sizes, shallow projection and different light outputs make these luminaires highly versatile. Our opal glass has a high transparency level, is resistant to ageing, easy to clean and looks brilliant. If it is not vandalised, it can last indefinitely.


Protection class IP 65

Cast aluminium, aluminium and stainless steel
Opal glass, satin matt · With bayonet closure

Luminaires with on/off power supply unit or DALI controllable power supply unit

The luminaire luminous flux and the luminaire connected wattage quoted in the table might change as a result of technical progress. On our website you will find data sheets with information on each luminaire concerning not only the current values but also the LED service life and the luminous flux in relation to the respective colour temperature.

Luminaire colour graphite

LED colour temperature
  Lamp A B C AC/DC
24 042 K3   LED 9.2 W 1006 lm on/off 270 70 205
24 043 K3   LED 16.7 W 1610 lm DALI controllable 325 90 250
24 044 K3   LED 32.0 W 2928 lm DALI controllable 390 100 300