LED compact downlights for flush-mounting installation in unplastered or plastered concrete ceilings

Symmetrical, asymmetrical and flat beam light distribution

Downlights with three different light distributions for convenient flush-mounting installation in pre-cast concrete ceilings or in-situ concrete ceilings.

For the precise creation of the recessed opening, a recessed housing is available for flush-mounted installation in either formwork or plaster, depending on the structural requirements.

The recessed housing for plaster is delivered with a levelling device to ensure precise alignment with the plaster thickness. Both recessed housings include a holder for the luminaire’s external DALI power supply unit for convenient overhead installation.

Once the ceiling has been completed, the luminaire can be installed easily and without tools using the practical bayonet closure.

Efficient, permanent optical systems make optimum lighting control possible. The luminaires offer a high-quality look and feel that is enhanced by the flush-mounting in the ceiling surface, and are available with different LED outputs and dimensions. They are equipped with BEGA Thermal Management ® technology to protect the luminaires from overheating due to excessive ambient temperatures.


Protection class  IP 65
BEGA Thermal Management ®

Cast aluminium, aluminium and stainless steel
Safety glass
Reflector surface made of pure aluminium
24 512 · 24 483 silicone lens

Luminaires with symmetrical and flat beam light distribution: BEGA Hybrid Optics ®

DALI controllable
Cable between the luminaire and the power supply unit with plug connector

20-year availability guarantee for LED modules

Please note: An installation housing is always required for installing the luminaires.

The required installation depths can be found in the instructions for use for these luminaires.

The luminaire luminous flux and the luminaire connected wattage quoted in the table may change as a result of technical progress. On our website you will find data sheets with information on each luminaire concerning not only the current values but also the LED service life and the luminous flux in relation to the respective colour temperature.

Housing colour graphite

LED colour temperature
Symmetrical narrow beam light distribution 
LED Power supply unit β A B AC/DC
24 482 K3 19.6 W 2258 lm DALI controllable 20° 135 80
24 485 K3 28.0 W 2854 lm DALI controllable 14° 155 90
Symmetrical wide beam light distribution 
LED Power supply unit β A B AC/DC
24 496 K3 19.6 W 2224 lm DALI controllable 30° 135 80
24 497 K3 28.0 W 2845 lm DALI controllable 25° 155 90
Symmetrical very wide beam light distribution 
LED Power supply unit β A B AC/DC
24 498 K3 19.6 W 2086 lm DALI controllable 72° 135 80
24 510 K3 19.6 W 1875 lm DALI controllable 86° 135 80
24 484 K3 28.0 W 2753 lm DALI controllable 63° 155 90
24 487 K3 28.0 W 2567 lm DALI controllable 86° 155 90
Asymmetrical light distribution · wallwasher 
LED Power supply unit β A B AC/DC
24 512 K3 13.2 W 1212 lm DALI controllable 63/64° 135 80
24 483 K3 19.6 W 1902 lm DALI controllable 70/67° 155 90
flat beam light distribution 
LED Power supply unit β A B AC/DC
24 514 K3 19.6 W 2000 lm DALI controllable 100/57° 135 80
24 486 K3 28.0 W 2600 lm DALI controllable 105/58° 155 90
no longer included in the current catalogue new in the range