0
0
Watch list
was added to the project list.
×

LED façade floodlights

Symmetrical or asymmetrical light distribution


We have developed a new LED façade floodlight specially for the linear illumination of façades or façade sections.

The façade floodlights can be installed on floor surfaces as well as ceiling surfaces. The inclination angle of the floodlight is adjustable. The wall outrigger arm 71 036 allows façade mounting of the luminaires.

These luminaires are available in two installation lengths with symmetrical or asymmetrical light distribution. You can find relevant information on half beam angles in the table. The luminaires can be installed side by side to form a continuous light strip.

Simple 5-pole plug connectors are used for the electrical connection to the next luminaire. To bridge larger distances, we can supply connection cables of various lengths which are ready for connection. The connection cable 71 037 can also be used as a maintenance cable.

more
Share

Protection class IP 65

Cast aluminium, aluminium and stainless steel
Safety glass, clear
Reflector made of pure anodised aluminium

DALI controllable

Please note: A separate connection box is required for the electrical connection to the luminaires. Connection boxes are accessories and must be ordered separately.
The connection from one luminaire to another is made with the connection cables supplied with the luminaires.

The attack angle of the luminaires is adjustable in 2° steps from -8° to 8°.

The luminaire luminous flux and the luminaire connected wattage quoted in the table might change as a result of technical progress. On our website you will find data sheets with information on each luminaire concerning not only the current values but also the LED service life and the luminous flux in relation to the respective colour temperature.

Planning examples

On the basis of our empirical values and the suggestions of architects and planners, we have compiled room situations for which lighting design is frequently required. In the following, we shall present possible illumination solutions for these architectural situations. It goes without saying that all technical lighting standards are complied with. In some cases, the degree of illuminance proposed by us may even exceed the standard. For us, the aesthetics of light and a high level of visual comfort are important criteria for such decisions. At the same time, the form and the size of the luminaires must fit into the architectural surroundings. For example, we often recommend larger models if a structure has large dimensions – even if smaller luminaires with lower output would be enough. In such cases, the degree of illuminance can be reduced to a suitable level by means of a light control system.


Advertising space

The illumination of advertising spaces repeatedly presents new challenges. A change in motif from a very light to a dark motif, or vice versa, requires an adjustment of the degree of illuminance for the advertising to be effective. In this case, a control unit for the luminaires is strongly recommended in order to provide numerous options for illuminating advertising posters. In the following...

learn more


Historical building

For the illumination of the building with floodlights, the aim is to illuminate all sides of the complex as uniformly as possible. An obvious solution is to position the high-performance floodlights symmetrically at the corners of the building. In most cases, one floodlight position is sufficient for two sides of the building. The floodlights are frequently fitted with louvres or shields to...

learn more


Historical façade

Various different luminaires are used to illuminate historical façades. Beginning on the ground floor, arcades are illuminated with in-ground floodlights. Here it is important to make sure that the luminaires can stand up to being driven over by car tyres. Depending on the version of the luminaires, pressure loads of up to 5000 kg are possible. Between the floors, the house has ledges from where...

learn more


Finish
LED colour temperature
Symmetrical light distribution 
  LED Power supply unit β A B C AC/DC
77 152 K3   19.5 W 1191 lm DALI controllable 12/85° 520 105 60
77 153 K3   38.0 W 2815 lm DALI controllable 14/89° 1000 105 60
 
77 154 K3   19.5 W 1072 lm DALI controllable 32/93° 520 105 60
77 155 K3   38.0 W 2347 lm DALI controllable 32/95° 1000 105 60
 
Symmetrical light distribution · Tunable White · 2700 K - 6500 K 
  LED Power supply unit β A B C AC/DC
84 375   15.0 W 1180 lm DALI controllable 12/85° 520 105 60
84 376   30.0 W 2560 lm DALI controllable 14/89° 1000 105 60
 
84 377   15.0 W 1065 lm DALI controllable 32/93° 520 105 60
84 378   30.0 W 2330 lm DALI controllable 32/95° 1000 105 60
 
Symmetrical light distribution · RGB W 
  LED Power supply unit β A B C AC/DC
84 199   17.0 W 610 lm DALI DT8 12/85° 520 105 60
84 200   30.0 W 1320 lm DALI DT8 14/89° 1000 105 60
 
84 179   17.0 W 550 lm DALI DT8 32/93° 520 105 60
84 180   30.0 W 1200 lm DALI DT8 32/95° 1000 105 60
 
Asymmetrical light distribution 
  LED Power supply unit β A B C AC/DC
77 156 K3   19.5 W 932 lm DALI controllable 43/77° 520 105 60
77 157 K3   38.0 W 2245 lm DALI controllable 46/77° 1000 105 60
 
Asymmetrical light distribution · Tunable White · 2700 K - 6500 K 
  LED Power supply unit β A B C AC/DC
84 379   15.0 W 925 lm DALI controllable 43/77° 520 105 60
84 380   30.0 W 2040 lm DALI controllable 46/77° 1000 105 60
 
Asymmetrical light distribution · RGB W 
  LED Power supply unit β A B C AC/DC
84 177   17.0 W 480 lm DALI DT8 43/77° 520 105 60
84 178   30.0 W 1050 lm DALI DT8 46/77° 1000 105 60