was added to the project list.

LED in-ground luminaires resistant to foot traffic

Symmetrical or asymmetrical light distribution

LED in-ground luminaires resistant to foot traffic with symmetrical or asymmetrical light distribution. The luminaire housing made of glass fibre reinforced synthetic material with trim ring made of stainless steel can be installed easily in the earth without drainage or foundation.

These are luminaires that emphasise and accentuate small trees, shrubs and objects in private gardens. Luminaires which allow you to experience the beauty of the garden, even when it is dark.


Protection class IP 67

Housing made of glass fibre reinforced synthetic material
Trim ring made of stainless steel and safety glass lie flat in a single plane
Reflector made of pure anodised aluminium

1.8 m connecting cable with water stop

For the electrical connection of the luminaires and for through-wiring to a further luminaire, we recommend using distribution box 70 730.

Please note:
The operating temperatures T specified in the table (according to EN 60598, ambient temperature ta 15 °C) are reached in the centre of the glass surface.

LED colour temperature 3000 K

The luminaire luminous flux and the luminaire connected wattage quoted in the table might change as a result of technical progress.
On our website you will find data sheets with information on each luminaire concerning not only the current values but also the LED service life.

Planning examples

On the basis of our empirical values and the suggestions of architects and planners, we have compiled room situations for which lighting design is frequently required. In the following, we shall present possible illumination solutions for these architectural situations. It goes without saying that all technical lighting standards are complied with. In some cases, the degree of illuminance proposed by us may even exceed the standard. For us, the aesthetics of light and a high level of visual comfort are important criteria for such decisions. At the same time, the form and the size of the luminaires must fit into the architectural surroundings. For example, we often recommend larger models if a structure has large dimensions – even if smaller luminaires with lower output would be enough. In such cases, the degree of illuminance can be reduced to a suitable level by means of a light control system.

Private house

With good exterior lighting, a private house appears comfortable and inviting. At the same time, this also improves safety. The area in front of the house is structured, from the driveway to the garage, from a front garden and a path to the house entrance. Small LED bollards line the garden and illuminate the paths with asymmetrical wide beam light. The garage entrance has these luminaires on...

learn more

Private garden

Light gives a garden structure and emphasises the plants and trees. Shielded bollards border the terrace which leads along the pool and ends in a seating area. Underwater floodlights create a Mediterranean lighting atmosphere. The large trees in the background reflect the light of the in-ground floodlights. Portable compact floodlights emphasise individual plants. The boundaries of the garden are...

learn more

Symmetrical light distribution 
77 010 K3   4.4 W 319 lm 32° 25° 110 70 120
77 011 K3   5.9 W 647 lm 47° 25° 155 95 170
Asymmetrical light distribution 
77 008 K3   4.3 W 318 lm 42° 25° 110 70 120
77 009 K3   5.9 W 717 lm 31° 25° 155 95 170

LED in-ground luminaires resistant to foot traffic in use