was added to the project list.

LED light building elements

Symmetrical light distribution · With 1 or 2 adjustable floodlights

Light building elements are luminous design elements for public areas. They are particularly suitable for dividing and structuring outdoor spaces. They can be used to guide or lead people and vehicles. Their attention-drawing power is considerably greater than that of pole-top luminaires. Light building elements can be used to serve the architectonic structure or to highlight it spectacularly.

These new light building elements can be used for various lighting applications in your lighting plans. They are ideal for the energy-efficient illumination of streets, parking spaces and traffic-calmed areas. On the other hand, they enable the illumination of architectonic details in the immediate vicinity of the luminaires. Façade elements, trees and other design elements in public spaces can be impressively accentuated with the additional LED high-performance floodlights.


Protection class  IP 65

Cast aluminium, aluminium and stainless steel
Synthetic cylinder, clear
Reflector made of pure anodised aluminium

Door and connection box 70 647
including anchorage unit
Dimmable 1-10 V

The inclination angle of the individual floodlights is adjustable from 0° to 30°.
The individual floodlights can be rotated by 360° around the vertical axis of the light building element.

We can also supply these luminaires with a base plate and in safety class II as custom-made products.
Also available on request with asymmetrical flat beam light distribution.

The luminaire luminous flux and the luminaire connected wattage quoted in the table might change as a result of technical progress. On our website you will find data sheets with information on each luminaire concerning not only the current values but also the LED service life and the luminous flux in relation to the respective colour temperature.

Planning examples

On the basis of our empirical values and the suggestions of architects and planners, we have compiled room situations for which lighting design is frequently required. In the following, we shall present possible illumination solutions for these architectural situations. It goes without saying that all technical lighting standards are complied with. In some cases, the degree of illuminance proposed by us may even exceed the standard. For us, the aesthetics of light and a high level of visual comfort are important criteria for such decisions. At the same time, the form and the size of the luminaires must fit into the architectural surroundings. For example, we often recommend larger models if a structure has large dimensions – even if smaller luminaires with lower output would be enough. In such cases, the degree of illuminance can be reduced to a suitable level by means of a light control system.

Train station forecourt

A forecourt of 40 x 20 m opens up in front of a station. This area is bordered by a low wall, which is interrupted by a staircase. This staircase is used to reach street level. Recessed wall luminaires are installed in the wall and in the steps of the staircase for orientation and guidance purposes. The forecourt is illuminated and at the same time structured by light building elements. These are...

learn more

LED colour temperature
1 floodlight 
88 863 K3   52.0 W 6279 lm 170 600 4500 800
  1 x 7.4 W 610 lm 17°
88 063 K3   52.1 W 6279 lm 220 700 5000 1000
  1 x 15.4 W 1115 lm 14°
2 floodlights 
88 865 K3   33.0 W 3663 lm 170 600 4500 800
  2 x 7.4 W 610 lm 17°
88 070 K3   52.1 W 6279 lm 220 700 5000 1000
  2 x 15.4 W 1115 lm 14°