0
0
Watch list
was added to the project list.
×

LED light design element

Flat beam light distribution


Light design elements for structuring and dividing up surfaces and squares. Robust luminaires which illuminate the ground surfaces directly in front of their installation site with a flat beam light distribution. Luminaires that also invite you to rest and relax – by day and by night.

The distinction between paths and squares is often effected by using different materials, colours, paving dimensions and joint patterns. BEGA light design elements enable a new additional dimension for the demanding design of open areas. Brilliant and robust design elements made of cast aluminium for the glare-free illumination of ground surfaces from a low mounting height.

Share

Protection class IP 65

Cast aluminium, aluminium and stainless steel
Safety glass
Reflector made of pure anodised aluminium

DALI controllable

With mounting plate made of hot-dip galvanised steel for bolting onto a foundation.

The luminaire luminous flux and the luminaire connected wattage quoted in the table might change as a result of technical progress. On our website you will find data sheets with information on each luminaire concerning not only the current values but also the LED service life and the luminous flux in relation to the respective colour temperature.

Finish
LED colour temperature
  LED Power supply unit A B C D AC/DC
77 754 K3   14.6 W 887 lm DALI controllable 400 x 400 460 120 240

Matching products

LED light design element in use