0
0
Watch list
was added to the project list.
×

LED on-ground luminaires

Asymmetrical light distribution


Compact LED on-ground luminaire for light from a very low mounting height. The asymmetrical light distribution is suitable for glare-free illumination of ground surfaces in front of the point of installation of the luminaire.

Luminaires for illuminating driveways and footpaths, for marking ground surfaces and for visual guidance in private and public areas. These luminaires are characterised by a robust construction made of cast aluminium as well as cost-effective and durable LED technology.

Share

Protection class IP 67

Cast aluminium, aluminium and stainless steel
Safety glass
Reflector made of pure anodised aluminium

DALI controllable

The luminaire luminous flux and the luminaire connected wattage quoted in the table might change as a result of technical progress. On our website you will find data sheets with information on each luminaire concerning not only the current values but also the LED service life and the luminous flux in relation to the respective colour temperature.

Planning examples

On the basis of our empirical values and the suggestions of architects and planners, we have compiled room situations for which lighting design is frequently required. In the following, we shall present possible illumination solutions for these architectural situations. It goes without saying that all technical lighting standards are complied with. In some cases, the degree of illuminance proposed by us may even exceed the standard. For us, the aesthetics of light and a high level of visual comfort are important criteria for such decisions. At the same time, the form and the size of the luminaires must fit into the architectural surroundings. For example, we often recommend larger models if a structure has large dimensions – even if smaller luminaires with lower output would be enough. In such cases, the degree of illuminance can be reduced to a suitable level by means of a light control system.


Office building entrance

A company is represented by the entrance area to its company building. Here, glare-free light should be used to clearly illuminate the way to the entrance door and at the same time to ensure good face recognition in the door area. On-ground luminaires are used to illuminate the path to the building; their light reaches far into the surface of the path, but without glare. Unshielded wall luminaires...

learn more


Finish
LED colour temperature
  LED Power supply unit A B C AC/DC
77 791 K3   11.2 W 340 lm DALI controllable 230 170 180
84 815 K3   19.5 W 712 lm DALI controllable 230 170 180