was added to the project list.
×

LED pole-top luminaires

Asymmetrical or asymmetrical flat beam light distribution


These luminaires belong to a group whose performance spectrum allows them to cover all lighting applications in street, square and city illumination; they are available as pole-top luminaires or as side-mounted pole-top luminaires. Two light distributions are available:

• Asymmetrical light distribution for providing spatial illumination of surfaces, squares and parking spaces or

• Asymmetrical flat beam light distribution, particularly suitable for illuminating streets in accordance with EN 13201.

For lighting technology with optimised efficiency level, we use only system components in reliable materials. Miro® reflectors made of highly-reflective pure aluminium, anti-glare single-pane safety glass and BEGA LED modules with 20-year availability guarantee. Luminaires ready for installation, for single and double arrangements.

more
Share

Protection class IP 66
BEGA Thermal Management ®
Safety class II

Cast aluminium, aluminium and stainless steel
Safety glass
Reflector made of pure anodised aluminium

Luminaires can be opened without tools
Luminaires ready for installation, for single or double arrangements.

BEGA Ultimate Driver ®
DALI controllable

20-year availability guarantee for LED modules

The luminaire luminous flux and the luminaire connected wattage quoted in the table may change as a result of technical progress. On our website you will find data sheets with information on each luminaire concerning not only the current values but also the LED service life and the luminous flux in relation to the respective colour temperature.

Planning examples

On the basis of our empirical values and the suggestions of architects and planners, we have compiled room situations for which lighting design is frequently required. In the following, we shall present possible illumination solutions for these architectural situations. It goes without saying that all technical lighting standards are complied with. In some cases, the degree of illuminance proposed by us may even exceed the standard. For us, the aesthetics of light and a high level of visual comfort are important criteria for such decisions. At the same time, the form and the size of the luminaires must fit into the architectural surroundings. For example, we often recommend larger models if a structure has large dimensions – even if smaller luminaires with lower output would be enough. In such cases, the degree of illuminance can be reduced to a suitable level by means of a light control system.


Roundabout

Roundabouts form typical conflict zones in road lighting in accordance with DIN EN 13 201. The roundabout must be illuminated if the roads leading to it are also illuminated. A degree of illuminance of 20 lx on the carriageway in the roundabout, without pedestrian crossings, represents good illumination. On driveways, the illumination level should be gradually increased from...

learn more


Finish
LED colour temperature
Pole-top luminaires · asymmetrical 
  LED A B C AC/DC Pole heigth Pole top
99 527 K3   103.5 W 13707 lm DALI controllable Single 340 75 820 8000 - 10 000 Ø 76
99 534 K3   207.0 W 27414 lm DALI controllable Double 340 75 1535 8000 - 10 000 Ø 76
 
Pole-top luminaires · asymmetrical flat beam 
  LED A B C AC/DC Pole heigth Pole top
99 599 K3   103.8 W 14457 lm DALI controllable Single 340 75 820 8000 - 10 000 Ø 76
99 481 K3   207.0 W 27426 lm DALI controllable Double 340 75 1535 8000 - 10 000 Ø 76