Watch list
was added to the project list.

LED pole-top luminaires und LED side-mounted pole-top luminaires

Asymmetrical or asymmetrical flat beam light distribution

These luminaires belong to a group whose performance spectrum allows them to be implemented for all lighting applications in street, square and city illumination. Two light distributions are available:
• asymmetrical light distribution for providing spatial illumination of surfaces, squares and parking spaces, or
• asymmetrical flat beam light distribution for illuminating streets. This light distribution is particularly suitable for illuminating streets in accordance with EN 13201.

For lighting technology with optimised efficiency level, we use only system components in reliable materials. Miro® reflectors made of reflection-intensive pure aluminium, anti-glare single-pane safety glass and BEGA LED modules with 20 years’ availability guarantee.

Luminaires suitable for integration in light and building control systems. For integration in an LCN or ZigBee-controlled building management system, we recommend the BEGA Control light control system.


Protection class IP 66
Safety class II

Cast aluminium, aluminium and stainless steel
Safety glass
Reflector made of pure anodised aluminium

Attack angle adjustable to 0° or 15°
Can be opened without the use of tools
Dimmable 1-10 V

Pole-top luminaires for pole top Ø 76 mm · also available on request for pole top Ø 60 mm
Side-mounted pole-top luminaires for connection Ø 42 mm · also available on request for connection Ø 60 mm

The luminaire luminous flux and the luminaire connected wattage quoted in the table might change as a result of technical progress. On our website you will find data sheets with information on each luminaire concerning not only the current values but also the LED service life and the luminous flux in relation to the respective colour temperature.

Planning examples

On the basis of our empirical values and the suggestions of architects and planners, we have compiled room situations for which lighting design is frequently required. In the following, we shall present possible illumination solutions for these architectural situations. It goes without saying that all technical lighting standards are complied with. In some cases, the degree of illuminance proposed by us may even exceed the standard. For us, the aesthetics of light and a high level of visual comfort are important criteria for such decisions. At the same time, the form and the size of the luminaires must fit into the architectural surroundings. For example, we often recommend larger models if a structure has large dimensions – even if smaller luminaires with lower output would be enough. In such cases, the degree of illuminance can be reduced to a suitable level by means of a light control system.


Roundabouts form typical conflict zones in road lighting in accordance with DIN EN 13 201. The roundabout must be illuminated if the roads leading to it are also illuminated. A degree of illuminance of 20 lx on the carriageway in the roundabout, without pedestrian crossings, represents good illumination. On driveways, the illumination level should be gradually increased from...

learn more

Loading zone

Good light in a loading and manoeuvring zone guarantees safety and smooth working processes. Where there are several adjacent loading openings in a building, glare-free luminaires are therefore placed above and between the gates. Their asymmetrical very wide beam light distribution creates a degree of illuminance of about 50 lx. In addition, location luminaires are installed in the wall about...

learn more


Bridges are architectural landmarks which leave a lasting impression of a city. The illumination of bridges is thus of particular significance. Through the accentuation of its striking form, the structure also has an effect at night and, at the same time, can clearly be identified as a point of orientation. The floodlights used are fitted with shields and louvres to prevent undesired stray light...

learn more

LED colour temperature
Pole-top luminaires · asymmetrical 
  LED A B C AC/DC Pole heigth Pole top
99 522 K3   54.0 W 6610 lm Single 340 75 660 7000 - 9000 Ø 76
99 523 K3   70.0 W 8928 lm Single 340 75 660 7000 - 9000 Ø 76
99 532 K3   108.0 W 13220 lm Double 340 75 1215 7000 - 9000 Ø 76
99 533 K3   140.0 W 18598 lm Double 340 75 1215 7000 - 9000 Ø 76
Pole-top luminaires · asymmetrical flat beam 
  LED A B C AC/DC Pole heigth Pole top
99 595 K3   54.0 W 7168 lm Single 340 75 660 7000 - 9000 Ø 76
99 596 K3   70.0 W 9118 lm Single 340 75 660 7000 - 9000 Ø 76
99 479 K3   140.0 W 18237 lm Double 340 75 1215 7000 - 9000 Ø 76
Side-mounted pole-top luminaires for bracket poles 
  LED A B C AC/DC Pole heigth Pole top
99 454 K3   54.0 W 7168 lm 340 75 695 7000 - 9000 Ø 60

LED pole-top luminaires und LED side-mounted pole-top luminaires in use