0
0
Watch list
was added to the project list.
×

LED recessed ceiling downlights

for external On/Off or DALI power supply units


The downlights are designed for installation in suspended ceilings.Together with the installation surface, the approx. 20 mm thick, hand-crafted crystal glass forms practically one plane.

The recessed luminaires, which are mounted almost flush with the ceiling, enable a calm and harmonious ceiling design and achieve high degrees of illuminance.

These downlights develop their material-related beauty particularly when illuminated.

Share

Luminaire housing
Cast aluminium
Ceiling recessed housing made of synthetic material
Partially frosted crystal glass
Reflector made of pure anodised aluminium

Colour rendering index (CRI) > 90

An on/off power supply unit or DALI power supply unit can be optionally connected to the luminaire by means of simple plug connectors. External power supply units for operating these luminaires are accessories and must be ordered separately.

If these luminaires are to be integrated into an LCN or ZigBee-controlled building management system, we recommend our BEGA Control light control system.

The required installation depths can be found in the instructions for use for these luminaires.

The luminaire luminous flux and the luminaire connected wattage quoted in the table might change as a result of technical progress. On our website you will find data sheets with information on each luminaire concerning not only the current values but also the LED service life and the luminous flux in relation to the respective colour temperature.

Finish
LED colour temperature
  LED β A B AC/DC
50 690.1 K3   9.5 W 710 lm 47° 180 110
50 692.1 K3   20.0 W 1610 lm 48° 240 145