0
0
Watch list
was added to the project list.
×

LED recessed ceiling downlights

for external On/Off or DALI power supply units


The downlights are designed for installation in suspended ceilings.

The approx. 20 mm thick, hand-crafted crystal glass lends the luminaires a striking appearance. As do the brilliant and multi-faceted light graphics. Both the room and the installation surface are illuminated, creating a pleasant lighting climate with brilliant accents.

Share

Luminaire housing made of cast aluminium
Ceiling recessed housing made of synthetic material
Partially frosted crystal glass
Reflector made of pure anodised aluminium

Colour rendering index (CRI) > 90

An on/off power supply unit or DALI power supply unit can be optionally connected to the luminaire by means of simple plug connectors. External power supply units for operating these luminaires are accessories and must be ordered separately.

If these luminaires are to be integrated into an LCN or ZigBee-controlled building management system, we recommend our BEGA Control light control system.

The required installation depths can be found in the instructions for use for these luminaires.

The luminaire luminous flux and the luminaire connected wattage quoted in the table might change as a result of technical progress. On our website you will find data sheets with information on each luminaire concerning not only the current values but also the LED service life and the luminous flux in relation to the respective colour temperature.

Planning examples

On the basis of our empirical values and the suggestions of architects and planners, we have compiled room situations for which lighting design is frequently required. In the following, we shall present possible illumination solutions for these architectural situations. It goes without saying that all technical lighting standards are complied with. In some cases, the degree of illuminance proposed by us may even exceed the standard. For us, the aesthetics of light and a high level of visual comfort are important criteria for such decisions. At the same time, the form and the size of the luminaires must fit into the architectural surroundings. For example, we often recommend larger models if a structure has large dimensions – even if smaller luminaires with lower output would be enough. In such cases, the degree of illuminance can be reduced to a suitable level by means of a light control system.


Bar

The room is defined by graphic-like large-area luminaires on the walls. Their light is very soft and uniform. LED pendant luminaires made of opal glass and velvet black painted metal are mounted above the counter. Most of the light is glare-free and shines directly onto the counter, thus ensuring a high degree of visual comfort. The counter area opens out into a larger lounge area. This is...

learn more


Finish
LED colour temperature
  LED β A B AC/DC
50 693.1 K3   9.5 W 759 lm 47° 145 95
50 695.1 K3   20.0 W 1724 lm 48° 205 130