LED recessed wall luminaires

For flush or surface mounting

For decades, BEGA luminaires from this series have been outstanding lighting construction details on numerous structures worldwide. We have developed these luminaires further and perfectly adapted their structure and design to our LED technology. The extremely low maintenance requirements allow a new product concept with far easier and quicker installation. The electrical connection is now comfortably established before installation in the structure. The installed luminaire is then mounted securely in the structure or in the installation housing with our BEGA mounting system. The installation dimensions are identical to those of the previous luminaires. The slim yet screwless luminaire frames are highly distinctive.

The unshielded luminaires are optionally available as luminaires for areas where a higher degree of illuminance is required, or as location luminaires with lower light output.


Protection class  IP 65
BEGA Thermal Management ®

Cast aluminium, aluminium and stainless steel
Safety glass

24 012 · 24 013  DALI controllable

20-year availability guarantee for LED modules

The luminaire luminous flux and the luminaire connected wattage quoted in the table may change as a result of technical progress. On our website you will find data sheets with information on each luminaire concerning not only the current values but also the LED service life and the luminous flux in relation to the respective colour temperature.

Planning examples

On the basis of our empirical values and the suggestions of architects and planners, we have compiled room situations for which lighting design is frequently required. In the following, we shall present possible illumination solutions for these architectural situations. It goes without saying that all technical lighting standards are complied with. In some cases, the degree of illuminance proposed by us may even exceed the standard. For us, the aesthetics of light and a high level of visual comfort are important criteria for such decisions. At the same time, the form and the size of the luminaires must fit into the architectural surroundings. For example, we often recommend larger models if a structure has large dimensions – even if smaller luminaires with lower output would be enough. In such cases, the degree of illuminance can be reduced to a suitable level by means of a light control system.


The pleasant illumination invites visitors to enter the building. The forecourt is arranged and structured by LED light building elements. The massive structure, for example a theatre, becomes accessible via a generously dimensional staircase entering the building. Most of the light in this area comes from the ceiling. Efficient LED floodlights guarantee imposing light and give the staircase and...

learn more

Train station forecourt

A forecourt of 40 x 20 m opens up in front of a station. This area is bordered by a low wall, which is interrupted by a staircase. This staircase is used to reach street level. Recessed wall luminaires are installed in the wall and in the steps of the staircase for orientation and guidance purposes. The forecourt is illuminated and at the same time structured by light building elements. These are...

learn more

LED colour temperature
Unshielded light 
LED Power supply unit A B AC/DC
24 011 K3 4.9 W 367 lm on/off 130 100
24 012 K3 10.2 W 831 lm DALI controllable 190 100
24 013 K3 13.8 W 1383 lm DALI controllable 250 100
Location luminaires 
LED Power supply unit A B AC/DC
24 016 K3 3.7 W 185 lm on/off 130 100
24 017 K3 4.8 W 485 lm on/off 190 100
24 018 K3 6.7 W 746 lm on/off 250 100
no longer included in the current catalogue new in the range

LED recessed wall luminaires in use

Villa in Essen-Bredeney, Germany Learn more
Tram stop at Europaplatz, Berlin Learn more
RIVA residential and commercial building, Dortmund Learn more