0
0
Watch list
was added to the project list.
×

LED recessed wall luminaires


LED recessed wall luminaires with high protection class IP 65 for indoors for illuminating corridors, paths and staircases.

With their brilliant accentuating effect, the visibly projecting glass edges underline the high quality of these luminaires.

The structure and design of the luminaires are perfectly coordinated with our LED technology. These luminaires can be installed as flush or surface-mounted units.

Our patented mounting system – patent EP 0686806 – allows fast and user-friendly connection and installation of the luminaires.

The installed luminaire is secured in the structure, e.g. in drywalls or in an installation housing, using the BEGA mounting system. You can choose between one installation housing and two plaster frames for the various installation situations. The luminaires can be surface-mounted as usual or they can be flush-mounted in plastered walls.

more
Share

Protection class IP 65

Luminaire housing made of cast aluminium
On/off power supply unit

Colour rendering index (CRI) > 90

A separate 24 V DC power supply unit is required for luminaire 34986 with 24 V DC · 2.6 W connected wattage · Safety class III.

Installation housings and plaster frames are accessories and must be ordered separately.

The luminaire luminous flux and the luminaire connected wattage quoted in the table might change as a result of technical progress. On our website you will find data sheets with information on each luminaire concerning not only the current values but also the LED service life and the luminous flux in relation to the respective colour temperature.

Planning examples

On the basis of our empirical values and the suggestions of architects and planners, we have compiled room situations for which lighting design is frequently required. In the following, we shall present possible illumination solutions for these architectural situations. It goes without saying that all technical lighting standards are complied with. In some cases, the degree of illuminance proposed by us may even exceed the standard. For us, the aesthetics of light and a high level of visual comfort are important criteria for such decisions. At the same time, the form and the size of the luminaires must fit into the architectural surroundings. For example, we often recommend larger models if a structure has large dimensions – even if smaller luminaires with lower output would be enough. In such cases, the degree of illuminance can be reduced to a suitable level by means of a light control system.


Living area

Open living area with a ceiling height of 5.5 m. A glass front provides a clear view of the adjacent terrace area. Recessed ceiling luminaires shining downwards are responsible for the basic illumination. On the far side, wall luminaires ensure pleasant background light. These luminaires emit glare-free light upwards and downwards, so that through their group arrangement the entire wall is...

learn more


Finish
LED colour temperature
  LED A B C AC/DC
34 986.1 K3   2.3 W 78 lm 80 80 80
34 987.1 K3   2.7 W 161 lm 100 100 80
34 988.1 K3   3.9 W 323 lm 150 150 90
34 989.1 K3   6.8 W 697 lm 190 190 100