0
0
Watch list
was added to the project list.
×

LED recessed wall luminaires for surface mounting

Unshielded luminaires and location luminaires


For decades, BEGA luminaires from this series have been outstanding lighting construction details on numerous structures worldwide. These new luminaires continue and at the same time complete the existing series. Their structure and design have been perfectly coordinated with our LED technology. The extremely low maintenance requirements of our LED technology allow a new product concept with far easier and quicker installation.The electrical connection is now comfortably established before installation in the structure. The installed luminaire is then mounted securely in the structure or in the installation housing with our BEGA mounting system. The installation dimensions are identical to those of the previous luminaires. The slim yet screwless luminaire frames are highly distinctive.

The unshielded luminaires are optionally available as location luminaires with lower light output or as unshielded luminaires for applications where a higher degree of illuminance is required.

more
Share

Protection class  IP 65

Cast aluminium, aluminium and stainless steel
Safety glass

24 012 · 24 013  DALI controllable

The luminaire luminous flux and the luminaire connected wattage quoted in the table might change as a result of technical progress. On our website you will find data sheets with information on each luminaire concerning not only the current values but also the LED service life and the luminous flux in relation to the respective colour temperature.

Planning examples

On the basis of our empirical values and the suggestions of architects and planners, we have compiled room situations for which lighting design is frequently required. In the following, we shall present possible illumination solutions for these architectural situations. It goes without saying that all technical lighting standards are complied with. In some cases, the degree of illuminance proposed by us may even exceed the standard. For us, the aesthetics of light and a high level of visual comfort are important criteria for such decisions. At the same time, the form and the size of the luminaires must fit into the architectural surroundings. For example, we often recommend larger models if a structure has large dimensions – even if smaller luminaires with lower output would be enough. In such cases, the degree of illuminance can be reduced to a suitable level by means of a light control system.


Staircase

The pleasant illumination invites visitors to enter the building. The forecourt is arranged and structured by LED light building elements. The massive structure, for example a theatre, becomes accessible via a generously dimensional staircase entering the building. Most of the light in this area comes from the ceiling. Efficient LED floodlights guarantee imposing light and give the staircase and...

learn more


Train station forecourt

A forecourt of 40 x 20 m opens up in front of a station. This area is bordered by a low wall, which is interrupted by a staircase. This staircase is used to reach street level. Recessed wall luminaires are installed in the wall and in the steps of the staircase for orientation and guidance purposes. The forecourt is illuminated and at the same time structured by light building elements. These are...

learn more


Finish
LED colour temperature
Unshielded light 
  LED Power supply unit A B AC/DC
24 011 K3   5.8 W 320 lm on/off 130 100
24 012 K3   10.2 W 831 lm DALI controllable 190 100
24 013 K3   14.8 W 1293 lm DALI controllable 250 100
 
Location luminaires 
  LED Power supply unit A B AC/DC
24 016 K3   3.7 W 180 lm on/off 130 100
24 017 K3   5.7 W 417 lm on/off 190 100
24 018 K3   8.0 W 645 lm on/off 250 100

LED recessed wall luminaires for surface mounting in use