was added to the project list.

LED recessed wall luminaires made of cast bronze

Shielded light

Recessed wall luminaires for the glare-free illumination of surfaces from a low mounting height. Glare-free luminaires that make important orientation points visible from a low mounting height when it is dark or when the degree of illuminance is too low. They are also suitable for marking danger points.

Safety glass with light-directing texture distributes the light onto the surface to be illuminated. The glass is outside the visible area and is thus protected from damage.


Protection class  IP 65

Cast bronze and stainless steel
Safety glass

24 082  for 24 V DC · without power supply unit · Safety class III
24 084  DALI controllable

When making the recessed opening in masonry or concrete walls, it is advisable to use an installation housing.

The luminaire luminous flux and the luminaire connected wattage quoted in the table might change as a result of technical progress. On our website you will find data sheets with information on each luminaire concerning not only the current values but also the LED service life and the luminous flux in relation to the respective colour temperature.

LED colour temperature
  LED Power supply unit A B C AC/DC
24 082 K3   2.8 W 70 lm without · 24 V DC 85 90 20
24 083 K3   6.0 W 198 lm on/off 150 100 30
24 084 K3   10.2 W 539 lm DALI controllable 200 125 37