0
0
Watch list
was added to the project list.
×

LED recessed wall luminaires made of stainless steel

Location luminaires


Location luminaires with LED for installation in walls.

Different luminaire sizes and outputs are available for your lighting applications. The stainless steel trim ring and the luminaire glass lie flat – without offset – in a single plane. Corrosion-proof luminaires with high structural strength and protection class. Luminaires that guarantee reliable and cost-effective operation. On request, the location luminaires are also available in the LED light colours green, blue, amber and red.

Share

Protection class IP 68 20 m
Safety class III

Trim ring and luminaire housing made of stainless steel
Safety glass
Installation sleeve made of glass fibre reinforced polyamide

3 m connecting cable

A separate power supply unit · 24 V DC is required to operate the luminaires.
When making the recessed opening in masonry or concrete walls, it is advisable to use an installation housing.

The luminaire luminous flux and the luminaire connected wattage quoted in the table might change as a result of technical progress. On our website you will find data sheets with information on each luminaire concerning not only the current values but also the LED service life and the luminous flux in relation to the respective colour temperature.

LED colour temperature
Location luminaires 
  LED A B Recessed opening
33 880 K3   0.35 W 5 lm 37 65 Ø 30 x 100
33 881 K3   0.45 W 6 lm 50 75 Ø 45 x 100
33 882 K3   1.4 W 52 lm 75 80 Ø 70 x 100
 
Floodlights · symmetrical 
  LED A B Recessed opening
33 830 K3   0.5 W 32 lm 37 65 Ø 30 x 100
33 831 K3   1.4 W 133 lm 50 75 Ø 45 x 100
33 832 K3   5.2 W 259 lm 75 80 Ø 70 x 100

LED recessed wall luminaires made of stainless steel in use