was added to the project list.
×

LED system bollards

Unshielded · Light emission 360°


Climbing Center Innsbruck

BEGA LED system bollards are a modular system that enables the combination of luminaire heads and luminaire tubes with various additional functions. Often it is desirable for a lighting system to have luminaires of the same type and lighting technology, but with different heights or diameters. Additional components such as built-in LED floodlights, emergency lighting batteries, motion and light sensors and control modules for LCN and Zigbee can be useful additions.

Separate additional installations are not needed, thus lowering the costs. Simply order the bollard head and also the required bollard tube. Both modules can be easily and quickly connected to each other during installation.

more
Where to buy
Share

Protection class  IP 65
BEGA Thermal Management ®

Cast aluminium, aluminium and stainless steel
Synthetic cylinder, white

99 727  DALI controllable

20-year availability guarantee for LED modules

BEGA LED system bollards are bolted with a mounting plate onto a foundation provided by the customer or an anchorage unit made of hot-dip galvanised steel. The mounting system can be used to align the luminaire.

The luminaire luminous flux and the luminaire connected wattage quoted in the table may change as a result of technical progress. On our website you will find data sheets with information on each luminaire concerning not only the current values but also the LED service life and the luminous flux in relation to the respective colour temperature.

BEGA LED system bollards

We are pleased to present a modular bollard concept in the form of BEGA LED system bollards. The technical requirements to be met by luminaires are increasing all the time, especially in the planning of lighting systems of all shapes and sizes. BEGA LED system bollards are a modular system that enables the combination of luminaire heads and luminaire tubes with various additional functions.

learn more

Bollard heads

For the lighting function of the LED system bollards, you can choose from ten LED system bollard heads with different light distributions and light emissions to meet the requirements of the lighting situation in question. The LED system bollard heads are also available with different shapes and dimensions.

The LED system bollard head can quickly and easily be connected to the separately chosen LED system bollard tube during installation.

show all bollard heads

Bollard tubes

LED system bollard tubes offer the solutions for the frequently requested additional functions of bollards. They are available:

  • without components in two heights
  • made of Accoya® wood
  • with LED floodlight
  • with PIR motion and light sensor (optionally with DALI · Zigbee · LCN)
  • with control module Zigbee · LCN
  • with a single emergency lighting battery
  • Drive-through protection up to 7.5 t · BEGA Vehicle Blocker®
  • with 2 250 V type F safety sockets behind a lockable door
  • with a lockable door · with or without installation inserts
  • with charging module insert for electric cars (type 2)
  • with one integral safety socket
  • as closing head without illumination function

show all bollard tubes

Lighting technology

BEGA luminaires are available with different lighting parameters to provide efficient solutions for demanding lighting applications in a wide range of architectural situations. Additional components allow flexible and constructive lighting planning with BEGA luminaires.

LED technology

LED technology has redefined acquired standards and assessment criteria and created undreamt-of possibilities for designing with light. The sum total of its advantages makes this technology a milestone in lighting technology.
We use the superiority of LED in the development of new luminaires, but also in the technical perfection of existing luminaire series. In doing so, we go well beyond the applications normally expected on the market. We do this responsibly, competently and with a sense of proportion – but above all reliably. After all, reliability and a high standard of product quality are among our elementary values and convictions.In the development of our luminaires, therefore, thermo-management represents a great challenge. Efficiency and service life are already convincing and still improving. Module output and shape are variable and can be perfectly adapted to each luminaire. In addition to using high-grade components, we have also made design-related changes which contribute to favourable temperature conditions inside the luminaires.

More information about our LED technology

Planning examples

On the basis of our empirical values and the suggestions of architects and planners, we have compiled room situations for which lighting design is frequently required. In the following, we shall present possible illumination solutions for these architectural situations. It goes without saying that all technical lighting standards are complied with. In some cases, the degree of illuminance proposed by us may even exceed the standard. For us, the aesthetics of light and a high level of visual comfort are important criteria for such decisions. At the same time, the form and the size of the luminaires must fit into the architectural surroundings. For example, we often recommend larger models if a structure has large dimensions – even if smaller luminaires with lower output would be enough. In such cases, the degree of illuminance can be reduced to a suitable level by means of a light control system.

Park

A walk through a park: The pedestrian walkway is flanked by LED bollards, whose unshielded light illuminates the path uniformly. An arrangement of luminaires along the edge of the path with spacing of 5.5 m apart is chosen for this. The bushes and trees are illuminated from the ground. For a homogeneous impression, large trees are illuminated with two in-ground luminaires. The colour temperature...

learn more

Finish
LED colour temperature
Bollard heads · unshielded · 360° 
  LED Power supply unit A B AC/DC
99 719 K3   7.1 W 317 lm on/off 140 140 ✓
99 727 K3   20.0 W 936 lm DALI controllable 190 185 ✓
Bollard tubes · without components 
  Ø Connection box H
99 614   140 without components · low Connecting terminals 3 x 4 350
99 620   140 without components · high Connecting terminals 3 x 4 660
84 476   140 without components · made of Accoya® wood Connecting terminals 3 x 4 660
 
99 615   190 without components · low Connecting terminals 3 x 4 365
99 622   190 without components · high 70 632 815
84 464   190 without components · made of Accoya® wood 70 632 815
 
Bollard tubes · with components 
  Ø Connection box H
84 611   140 with PIR motion sensor + light sensor 71 601 660
84 168   140 with 1 safety socket D 70 629 660
71 126   140 Closing head without illumination function – 20
 
99 644 K3   190 with 1 LED floodlight 14.0 W · 1050 lm 70 632 815
84 633   190 with PIR motion sensor + light sensor 71 601 815
84 170   190 with PIR motion sensor + light sensor · DALI 71 601 815
84 615   190 with PIR motion sensor + light sensor · Zigbee 71 601 815
84 397   190 with PIR motion sensor + light sensor · LCN 71 601 815
84 640   190 with control module · Zigbee 71 601 815
84 638   190 with control module · LCN 70 854 815
84 634   190 with single emergency lighting battery 4 W · 3 h 70 871 815
84 169   190 with 1 safety socket D 70 869 815
99 626   190 with 2 safety sockets 250 V 70 869 815
71 127   190 Closing head without illumination function – 20
no longer included in the current catalogue new in the range

Matching products

close

Consultation

Phone
+49 (0) 2373 966-0

E-mail
service@bega.de

Contact form
send enquiry

About light and illumination

As manufacturers of luminaires, we would like to give you an insight into the exciting world of lighting design, lighting technology, electrical engineering and, in particular, light control, and share our enthusiasm for light with you.

learn more

Planning aids

We can provide planning aids in various formats in order to optimise your planning of our luminaires in your projects. These files are available on every product page by clicking on the article number under the tab “Planning aids”.

learn more

Close language selection

Choose country and language:

Please note: Products are available in the United States and Canada in conformance with UL and CSA standards:
visit www.bega-us.com

Please enter your search word:

More search options
Close search

You must agree to our terms and conditions of use in order to download this file

The materials provided for download by BEGA are merely examples of how our products can be used and representations of their illumination features. As such, they provide the user with information about possible options for installation and application while illustrating the effects of our products in their respective applications. This particularly applies in the context of planning services, consultations and tendering processes.

Accordingly, BEGA gives the user the right to duplicate these materials only for the above-mentioned purposes. Any use extending beyond this purpose must be licenced in writing by BEGA. In particular, it is prohibited to make the materials publicly accessible in any form (e.g. use of the materials by the user online).

The materials provided for download by BEGA are not intended for use as advertising materials. They are therefore not suitable for the promotion of our products for the purpose of resale by the user. No usage rights will be granted in this regard.
close
    
    
    
        schließen