0
0
Watch list
was added to the project list.
×

LED system bollards

LED system bollards

Why system bollards?

On the basis of the lighting planning for a company building, it becomes clear how helpful auxiliary components in luminaires can be. Planning is effected exclusively with BEGA system bollards.



  • Slider
  • Slider
  • Slider
  • Slider
  • Slider
  • LED system bollard with PIR motion and light sensor
    The entrance area of the building is flanked by four luminaires with 360° light emission (1) (2) (3). One of them (1) is fitted with a PIR motion and light sensor and activates the lighting system at dusk. When the building is open to the public, the lighting is raised from a dimmed level to a higher, standardised level. At the car park, another bollard (1) with a PIR motion and light sensor activates the lighting system.

  • System bollard with adjustable LED floodlight
    In the bollards (2) directly at the entrance, adjustable LED floodlights have been installed to illuminate the plants and trees.

  • System bollard with emergency lighting, 1 h · 3 h single battery light emission 360°
    The path in the other direction is accompanied by luminaires (4) with 360° light emission. These are fitted with emergency lighting batteries, and in case of emergency provide safety on the escape route to the assembly point. At the emergency exit as well, two of these luminaires point the way there.

  • System bollard as a connecting pillar for 16 A · 250 V ~ and 400 V ~, with lockable door
    The bollards (5) between the car park and the path by the building provide electric cars with charging current.

    All in all, two different luminaire heads and five different bollard tubes are used. The form language of all luminaires is uniform, offering a balanced appearance. This guarantees integration in the architecture. The installation of additional devices to supplement the lighting system is not necessary.