0
0
Watch list
was added to the project list.
×

LED wall luminaires

Directed light


Shielded wall luminaires with directed light which, on account of their compact dimensions, are particularly suitable for installation on pillars and the front surfaces of external walls. Luminaires for different installation heights and many different uses in private and public areas. As single luminaires with a low mounting height, they can be used for marking danger areas – in rows for illuminating corridors and passageways.

Share

Protection class IP 64

Cast aluminium, aluminium and stainless steel
Safety glass

The luminaire luminous flux and the luminaire connected wattage quoted in the table might change as a result of technical progress. On our website you will find data sheets with information on each luminaire concerning not only the current values but also the LED service life and the luminous flux in relation to the respective colour temperature.

Planning examples

On the basis of our empirical values and the suggestions of architects and planners, we have compiled room situations for which lighting design is frequently required. In the following, we shall present possible illumination solutions for these architectural situations. It goes without saying that all technical lighting standards are complied with. In some cases, the degree of illuminance proposed by us may even exceed the standard. For us, the aesthetics of light and a high level of visual comfort are important criteria for such decisions. At the same time, the form and the size of the luminaires must fit into the architectural surroundings. For example, we often recommend larger models if a structure has large dimensions – even if smaller luminaires with lower output would be enough. In such cases, the degree of illuminance can be reduced to a suitable level by means of a light control system.


Pedestrian bridge

There are many options for illuminating pedestrian bridges. Two completely different approaches are shown here. The bridge measures 20 x 2.4 m. The illumination standard DIN EN 13 201 for pedestrian walkways and cycle paths applies here. The average degree of illuminance required is 5 lx, and the minimum value is 1 lx. Pedestrians and cyclists should feel safe and therefore comfortable on the...

learn more


Finish
LED colour temperature
  LED A B C AC/DC
33 513 K3   3.5 W 159 lm 55 140 60
33 514 K3   5.8 W 202 lm 55 200 60

Matching products