0
0
Watch list
was added to the project list.
×

LED wall washers

Symmetrical or asymmetrical light distribution


Compact and powerful LED wall washers, optionally with symmetrical or asymmetrical light distribution. Luminaires with symmetrical light distribution are used for illuminating wall surfaces. The mounting surface acts simultaneously as a reflection surface.

Depending on the direction of the beam, luminaires with asymmetrical light distribution mainly illuminate the surfaces adjacent to the installation surface, such as ceilings, arches, canopies, cantilever plates or ground surfaces. Flush safety glass which prevents dirt and water from accumulating on the luminaires are the norm for these luminaires. These are durable construction details that prove convincing thanks to maximum standards of lighting and structural quality.

more
Share

Protection class IP 65

Cast aluminium, aluminium and stainless steel
Safety glass
Reflector made of pure anodised aluminium

DALI controllable

The luminaires can be mounted with the light aperture directed upwards or downwards.

The luminaire luminous flux and the luminaire connected wattage quoted in the table might change as a result of technical progress. On our website you will find data sheets with information on each luminaire concerning not only the current values but also the LED service life and the luminous flux in relation to the respective colour temperature.

Planning examples

On the basis of our empirical values and the suggestions of architects and planners, we have compiled room situations for which lighting design is frequently required. In the following, we shall present possible illumination solutions for these architectural situations. It goes without saying that all technical lighting standards are complied with. In some cases, the degree of illuminance proposed by us may even exceed the standard. For us, the aesthetics of light and a high level of visual comfort are important criteria for such decisions. At the same time, the form and the size of the luminaires must fit into the architectural surroundings. For example, we often recommend larger models if a structure has large dimensions – even if smaller luminaires with lower output would be enough. In such cases, the degree of illuminance can be reduced to a suitable level by means of a light control system.


Spa

In a spa zone, the illumination makes a significant contribution towards the well-being of the guests. Alternating zones with dimmed light and zones accentuated with illumination are ideal for the relaxation of the guests. At the same time, the lighting system must be able to illuminate the rooms clearly for cleaning purposes. On account of the climatic conditions in such facilities, only luminaires...

learn more


Finish
LED colour temperature
Symmetrical light distribution 
  LED Power supply unit A B C AC/DC
33 360 K3   19.2 W 1889 lm DALI controllable 260 75 155
24 361 K3   38.0 W 3987 lm DALI controllable 320 105 190
 
Asymmetrical light distribution 
  LED Power supply unit A B C AC/DC
33 361 K3   19.2 W 1727 lm DALI controllable 260 75 155
24 362 K3   38.0 W 3727 lm DALI controllable 320 105 190