LED wall washers

Light emission on two sides · Symmetrical, asymmetrical or flat beam light distribution


LED wall washers with light emission on two sides, with three light distributions for different lighting requirements. One light emission always has symmetrical light distribution, which serves to illuminate the façade and wall surfaces.

The following light distributions are available for the second light emission
• Symmetrical light distribution for illuminating façade and wall surfaces, with the mounting surface also acting as a reflection surface
• Asymmetrical light distribution for illuminating ground surfaces in front of walls and façades. Here, the main focus is on the spatial illumination of the ground surfaces
• Flat beam light distribution for illuminating the ground surfaces in front of walls and facades. Here, the main focus is on the flat beam illumination of the surfaces near the building.

more

Protection class IP 65
BEGA Thermal Management ®

Cast aluminium, aluminium and stainless steel
Safety glass
Reflector made of pure anodised aluminium

2 integral power supply units, individually DALI controllable

20-year availability guarantee for LED modules

The luminaires can be installed in any burning position.

The luminaire luminous flux and the luminaire connected wattage quoted in the table may change as a result of technical progress. On our website you will find data sheets with information on each luminaire concerning not only the current values but also the LED service life and the luminous flux in relation to the respective colour temperature.

Finish
LED colour temperature
Symmetrical · symmetrical 
LED Power supply unit A B C AC/DC
 
Symmetrical · asymmetrical 
LED Power supply unit A B C AC/DC
 
Symmetrical · flat beam 
LED Power supply unit A B C AC/DC
no longer included in the current catalogue new in the range