LED wall washers

Symmetrical and asymmetrical light distribution


Luminaires with symmetrical light distribution are used for illuminating wall surfaces. The mounting surface acts simultaneously as a reflection surface.

Depending on the direction of the beam, luminaires with asymmetrical light distribution mainly illuminate the surfaces adjacent to the installation surface, such as ceilings, arches, canopies, cantilever plates or ground surfaces.

The burning position of the luminaires can be chosen freely. In addition, two luminaire lengths and the dimmability of the luminaires allow a wide range of applications both indoors and out.

Protection class IP 65
BEGA Thermal Management ®

Cast aluminium, aluminium and stainless steel
Safety glass
Reflector made of pure anodised aluminium

DALI controllable

The luminaires can be installed in any burning position.

The luminaire luminous flux and the luminaire connected wattage quoted in the table might change as a result of technical progress. On our website you will find data sheets with information on each luminaire concerning not only the current values but also the LED service life and the luminous flux in relation to the respective colour temperature.

Finish
LED colour temperature
Symmetrical light distribution 
LED Power supply unit A B C AC/DC
44 573 K3 24.0 W 1344 lm DALI controllable 530 80 115
44 574 K3 21.5 W 2880 lm DALI controllable 980 80 115
 
Asymmetrical light distribution 
LED Power supply unit A B C AC/DC
44 582 K3 11.5 W 1339 lm DALI controllable 530 80 115
44 583 K3 21.5 W 2605 lm DALI controllable 980 80 115
no longer included in the current catalogue new in the range

Matching products