DALI system components

DALI was designed specially for the room-related control of building automation systems. A priority is the user-friendly control of light. DALI products are based on the standard EN 62386. DALI is compatible with DALI products commonly found on the market. Actuators and sensors from other manufacturers can be integrated, however they then need to be configured via the manufacturer’s software.


Software


DALI Cockpit

The comfortable software for configuring DALI systems and for monitoring communication on the DALI bus.

more information



User terminals


DALI display

Touch display for configuring and controlling two DALI lines and 99 sequences.
Time-dependent controls can be implemented and TW and CC luminaires can be controlled.

for flush installation
Installation frames for DALI Display


DALI touch panel

DALI touch panel is a multifunctional user terminal with a replaceable user interface for controlling luminaires with a DALI interface. For the manual control of LED, tunable white and RGBW luminaires.

for wall mounting


DALI rotary dimmer

DALI rotary dimmer for LED luminaire control. For switching and adjusting the brightness of DALI luminaires, for controlling tunable white luminaires (DT8) or RGB luminaires (DT8).

for installation in switching and cavity boxes


DALI cross switch

Functions such as groups, scenarios and staircase control can be assigned to the cross switch with four pushbuttons via the DALI Cockpit software. Suitable for tunable white (TW) and colour control (CC).

for installation in switching and cavity boxes


Sensors


DALI PIR motion and light sensor

DALI motion and light sensor
Passive infrared motion and light sensor for indoors which responds to movement. Vertical opening angle of +/- 46°, horizontal opening angle of +/- 51°. Range of twelve metres. The measuring range of the light sensor is between 0 and 2500 lx. Configuration is carried out via the DALI Cockpit software.

DALI light sensor
Sensor for indoors with a measuring range of between 0 and 2500 lx. Threshold values for performing switching commands can be set in the DALI Cockpit software.

for flush installation


DALI PIR motion and light sensor

DALI PIR motion and light sensor for detecting the movement of people and brightness levels. For controlling LED luminaires (DT6).

for outdoor wall mounting



Operating devices and modules


Smart DALI-Controller

The Smart DALI-Controller enables wireless control and dimming of up to 15 DALI luminaires

for installation in switching and cavity boxes


DALI power supply

Power supply for the DALI operating devices and the control devices.

for installation in switching and cavity boxes
for DIN rail mounting


DALI repeater

Enables the maximum cable length to be extended from 300 metres (DALI line) to 600 metres. Extension using a repeater is only possible once per DALI line.

for DIN rail mounting
in housing · Protection class IP 65


DALI switch actuator

For relay contact control via the DALI bus.

for installation in switching and cavity boxes

for DIN rail mounting


DALI switch module

Module for connecting four conventional pushbuttons or switches to control DALI operating devices.

for installation in switching and cavity boxes


DALI pushbutton module

Module for connecting four potential-free pushbuttons or switches to control DALI operating devices.

for installation in switching and cavity boxes


DALI daylight module

Control device for tunable white luminaires. Emulates the daylight curve (circadian curve). During the course of the day, the light is automatically controlled to be warmer or colder: warmer light in the morning and evening hours, colder light at noon time.

for installation in switching and cavity boxes


DALI sequencer module

Program for storing four independent sequences that can be started via DALI control elements, such as the DALI timer, DALI control module for four pushbuttons/switches or DALI cross switch.

for installation in switching and cavity boxes


DALI timer

For timer functions with up to 14 entries for calling up lighting scenarios for LED, tunable white and RGB W luminaires (DT6, DT8, RGBWAF, xy).

for installation in switching and cavity boxes


DALI power reducer

Control unit for automatic power reduction/night-time brightness reduction with integrated DALI power supply for up to nine standard DALI loads.

for installation in switching and cavity boxes



Interfaces & Gateways


DALI USB interface

Connection of the PC/laptop where the DALI Cockpit programming software is located to the DALI bus. Only required for programming.

for installation in switching and cavity boxes
for DIN rail mounting


Bluetooth DALI gateway

For the commissioning and power supply of DALI operating devices and control components in a DALI line with max. 64 devices.

for installation in switching and cavity boxes

for DIN rail mounting


KNX/DALI gateway · IPAS

KNX/DALI gateway IPAS for integrating 64 luminaires with a DALI operating device in a KNX system. Configuration of 16 DALI groups, of 16 DALI lighting scenarios, and of 16 sequences by means of an application program in the ETS software. DALI colour light control of tunable white and RGBW luminaires (DT8, RGBWAF, xy) can also be implemented in this way.

for DIN rail mounting


LCN/DALI gateway

Gateway for connecting the LCN world to the DALI world. This means that DALI luminaires can be controlled using LCN control elements/sensors. A control module is required for connection. Maximum number of DALI devices: 64.

for DIN rail mounting

in housing · Protection class IP 65



Tools


DALI programmer

DALI programmer for the configuration of DALI devices.
Four buttons can be programmed with DALI parameters.
The configuration and parametrisation of the component is carried out conveniently in the BEGA Tool app.

DALI programmer