0
0
Watch list
was added to the project list.
×

PLANETA LED large-area luminaires

Ceiling and wall luminaires


Large-area LED light with unusually high light output. These luminaires for indoors open up new and creative design options in many areas of architecture. A crystal glass disk, white frosted on the inside and fitted flush with the frame, distributes the light uniformly onto the surface to be illuminated.

The luminaires are DALI controllable and available optionally with fixed or variable colour temperature (tunable white). Tunable white luminaires can be controlled using a DALI colour light control (DT 8, TW).We recommend our BEGA Control system for this purpose.

By adjusting the colour temperature you can adapt the illumination perfectly to your lighting requirements or to the required mood.Colour temperatures of between 2,700 and 6,500 K can be selected, perfectly covering the colour temperature range that is felt to be ideal.

more
Share

Crystal glass, inside white

DALI controllable
Colour rendering index (CRI) > 90

If these luminaires are to be integrated into an LCN or ZigBee-controlled building management system, we recommend our BEGA Control light control system.

LED colour temperature tunable white luminaires adjustable from 2700 K to 6500 K

The luminaire luminous flux and the luminaire connected wattage quoted in the table might change as a result of technical progress. On our website you will find data sheets with information on each luminaire concerning not only the current values but also the LED service life and the luminous flux in relation to the respective colour temperature.

Planning examples

On the basis of our empirical values and the suggestions of architects and planners, we have compiled room situations for which lighting design is frequently required. In the following, we shall present possible illumination solutions for these architectural situations. It goes without saying that all technical lighting standards are complied with. In some cases, the degree of illuminance proposed by us may even exceed the standard. For us, the aesthetics of light and a high level of visual comfort are important criteria for such decisions. At the same time, the form and the size of the luminaires must fit into the architectural surroundings. For example, we often recommend larger models if a structure has large dimensions – even if smaller luminaires with lower output would be enough. In such cases, the degree of illuminance can be reduced to a suitable level by means of a light control system.


Foyer

The illumination of large rooms is frequently effected using efficient downlights or pendant luminaires. In this example, both types are used. The distinctive pendant luminaires distribute soft light downwards from a height of 6 m. Visitors are received in the upwardly open ground floor with a degree of illuminance of 200 lx. These luminaires do not cause glare, in spite of the high...

learn more


Bar

The room is defined by graphic-like large-area luminaires on the walls. Their light is very soft and uniform. LED pendant luminaires made of opal glass and velvet black painted metal are mounted above the counter. Most of the light is glare-free and shines directly onto the counter, thus ensuring a high degree of visual comfort. The counter area opens out into a larger lounge area. This is...

learn more


Finish
LED colour temperature
  LED Power supply unit A B AC/DC
34 022.1 K3   126.0 W 4323 lm DALI controllable 500 80
34 067.1 K3   220.0 W 10406 lm DALI controllable 750 80
 
Tunable white · 2700 K - 6500 K 
  LED Power supply unit A B AC/DC
50 280.1   66.5 W 5912 lm DALI DT8, TW 500 100
50 281.1   116.0 W 10190 lm DALI DT8, TW 750 100