PRIMA ceiling and wall luminaires

On/off power supply unit

Power supply units that are perfectly coordinated with the LEDs used with respect to constant current, output voltage range and output. Luminaires with on/off power supply units can be switched on and off at the mains – however dimming is not possible.

DALI controllable

Power supply units with the technical features of an on/off power supply unit, plus an additional DALI interface for controlling and/or dimming luminaires via a DALI control or DALI control element.

The power supply units are fully DALI-compliant, which means they are compatible with DALI controls from any manufacturer as per the DALI standard.

A five-core connecting cable (L/N/PE/DA/DA) is required for the DALI control of luminaires. The following DALI specifications must be observed: maximum DALI cable length of 300 metres, maximum of 64 operating devices per DALI line, maximum of 16 groups per DALI line, maximum of 16 scenes per DALI line.

Motion sensor

Motion sensor for controlling an LED power supply unit based on high-frequency technology (HF). Range of 10 m, conical detection field of approx. 120°.

Three different adjustment options:

• Holding time can be adjusted in seven increments from 10 to 1800 seconds
• Triggering sensitivity can be adjusted in five increments
• Integrated light sensor has six brightness levels

If multiple luminaires are to be switched via a single motion sensor, it is recommended that you use luminaires with a master module (switches a luminaire group) and luminaires with a slave module (single luminaire switched by the master module) for defined group switching.

Defined group: Motion sensor + group module (master) and slave module

Motion sensor with additional group module (master). When the motion sensor is triggered, the switch-on command is sent by radio to all luminaires with a group module (master and slave) in the same defined group. The group settings are made via DIP switches on the group module.

• Open field radio range of up to 100 m
• Radio range in buildings of up to 30 m – depending on the building structure
• Maximum of 48 master luminaires per group – unlimited number of slave luminaires

To integrate an unlimited number of slave luminaires in the defined group, the luminaires must be equipped with a group radio module, which receives the switch-on commands from a group module (master).

Satin matt hand-blown opal glass

The LED ceiling and LED wall luminaires are fitted with satin matt hand-blown opal glass in two different sizes. They distribute light evenly and softly, creating a pleasant lighting atmosphere with a high level of visual comfort.

The luminaires are also available with a cover made of an impact-resistant synthetic material for applications in which glass cannot be used.

Trim frames made of metal

Separately available metal trim frames in different enamel finishes (white, palladium, polished silver) allow you to individually match the ceiling and wall luminaires to different interior materials.

Reliable and cost-efficient

The ability to choose between two LED outputs with identical luminaire dimensions for ceiling and wall luminaires allows you to take a direct influence on the number of luminaires, the light effect and the interior design as early as the planning stage.

Good light in terms of light generation and light distribution, thanks to tried and tested BEGA quality. A colour rendering index (CRI) of > 90 is achieved in combination with the LED modules manufactured in-house with opal glass. A further advantage as early as the planning stage: A choice of LED colour temperatures (2700, 3000 or 4000 K).

The luminaires of the PRIMA series will impress you with their minimum LED service life of 50,000 hours. BEGA has answered the call for LED replacement modules for its customers. An LED article number in every LED luminaire provides exact details of the installed modules. The fact that we produce the luminaires ourselves allows us to supply our customers with replacement modules even 20 years after they have purchased an LED luminaire – in the latest configuration, of course.

LED technology

LED technology has redefined acquired standards and assessment criteria and created undreamt-of possibilities for designing with light. The sum total of its advantages makes this technology a milestone in lighting technology.
We use the superiority of LED in the development of new luminaires, but also in the technical perfection of existing luminaire series. In doing so, we go well beyond the applications normally expected on the market. We do this responsibly, competently and with a sense of proportion – but above all reliably. After all, reliability and a high standard of product quality are among our elementary values and convictions.In the development of our luminaires, therefore, thermo-management represents a great challenge. Efficiency and service life are already convincing and still improving. Module output and shape are variable and can be perfectly adapted to each luminaire. In addition to using high-grade components, we have also made design-related changes which contribute to favourable temperature conditions inside the luminaires.

More information about our LED technology