was added to the project list.
×

Recessed ceiling luminaires · Downlights

for external On/Off or DALI power supply units


The downlights on these pages are designed for installation in suspended ceilings.

The approx. 20 mm thick, hand-made crystal glass, which is held in place by a ceiling trim ring, defines the luminaire’s form and creates an impressively multi-faceted play of light. Both the room and the installation surface are illuminated, creating a pleasant lighting climate with brilliant accents. The luminaires and the external power supply units required for your lighting systems can be connected by means of a simple plug connector.

Luminaire housing made of cast aluminium
Ceiling recessed housing made of synthetic material
Partially frosted crystal glass
Reflector made of pure anodised aluminium

Silicone diffusing lens

Cable between the luminaire and the power supply unit with plug connector
for external on/off or DALI power supply units

Colour rendering index (CRI) > 90

20-year availability guarantee for LED modules

The required installation depths can be found in the instructions for use for these luminaires.

The power information may change during the validity period of the catalogue as a result of technical progress. You can find data sheets for all luminaires on our website. They contain all luminaire data and the current values for LED service life, luminous flux and maximum ambient temperature.

Planning examples

On the basis of our empirical values and the suggestions of architects and planners, we have compiled room situations for which lighting design is frequently required. In the following, we shall present possible illumination solutions for these architectural situations. It goes without saying that all technical lighting standards are complied with. In some cases, the degree of illuminance proposed by us may even exceed the standard. For us, the aesthetics of light and a high level of visual comfort are important criteria for such decisions. At the same time, the form and the size of the luminaires must fit into the architectural surroundings. For example, we often recommend larger models if a structure has large dimensions – even if smaller luminaires with lower output would be enough. In such cases, the degree of illuminance can be reduced to a suitable level by means of a light control system.


Bar

The room is defined by graphic-like large-area luminaires on the walls. Their light is very soft and uniform. LED pendant luminaires made of opal glass and velvet black painted metal are mounted above the counter. Most of the light is glare-free and shines directly onto the counter, thus ensuring a high degree of visual comfort. The counter area opens out into a larger lounge area. This is...

learn more


Finish
LED colour temperature
LED β A B AC/DC
50 693.1 K3 9.8 W 759 lm 55° 145 95
50 695.1 K3 20.0 W 1724 lm 50° 205 130
no longer included in the current catalogue new in the range