Recessed luminaires for walls and staircases

For flush or surface-mounted installation · Unshielded light


For decades, BEGA luminaires from this series have been outstanding lighting construction details on numerous structures worldwide. We are constantly developing these luminaires and always perfectly match the construction and design to our LED technology.

The electrical connection is comfortably established before installation in the structure. The now-connected luminaire is then mounted in the building structure or installation housing using the BEGA mounting system. All installation dimensions are identical to those of the previous luminaires. The slim, screwless luminaire frames are distinctive in their design.

Depending on the size, the luminaires can be installed in risers and in walls – both indoors and out.

The unshielded luminaires are available with a choice of two light outputs. As luminaires for areas of application where a higher degree of illuminance is required or as location luminaires with lower light output.

more

Protection class IP 65
BEGA Thermal Management ®

Cast aluminium, aluminium and stainless steel
BEGA Unidure ® coating technology
Safety glass

On/off or DALI-controllable power supply units

20-year availability guarantee for LED modules

The luminaire luminous flux and the luminaire connected wattage quoted in the table may change as a result of technical progress. On our website you will find data sheets with information on each luminaire concerning not only the current values but also the LED service life and the luminous flux in relation to the respective colour temperature.

Installation

You can choose between two installation housings and two plaster frames for the various installation situations. The luminaires can be surface-mounted as usual or they can be flush-mounted in plastered walls. 


Surface mounting in all kinds of cavity wall

The BEGA mounting system allows fast and convenient installation in lightweight construction walls without any accessories.

Surface mounting in unplastered brickwork

The construction of an recessed opening on site with the exact installation dimensions of the luminaire is required. An installation housing cannot be used.

Surface mounting in unplastered concrete

To make the recessed opening in concrete, we recommend using the type A installation housing.

Surface mounting in unplastered EWIS façades

The type B installation housing with different insulating elements allows an adjustment of the insulation depth from 120 - 200 mm.

Surface mounting in plastered brickwork

The type C plaster frame in conjunction with the type A installation housing makes it possible to compensate for different plaster thicknesses.

Surface mounting

in plastered concrete The type C plaster frame in conjunction with the type A installation housing makes it possible to compensate for different plaster thicknesses.

Surface mounting in plastered EWIS façades

The type C plaster frame in conjunction with the type B installation housing makes it possible to compensate for different plaster thicknesses.

Flush mounting in plastered brickwork

The type D plaster frame in conjunction with the type A installation housing makes it possible to compensate for different plaster thicknesses and allows the flush-mounting installation of the luminaires.

Flush mounting in plastered concrete

The type D plaster frame in conjunction with the type A installation housing makes it possible to compensate for different plaster thicknesses and allows the flush-mounting installation of the luminaires.

Flush mounting in plastered EWIS façades

The type D plaster frame in conjunction with the type B installation housing makes it possible to compensate for different plaster thicknesses and allows the flush-mounting installation of the luminaires.

Lighting technology

BEGA luminaires are available with different lighting parameters to provide efficient solutions for demanding lighting applications in a wide range of architectural situations. Additional components allow flexible and constructive lighting planning with BEGA luminaires.


LED technology

LED technology has redefined acquired standards and assessment criteria and created undreamt-of possibilities for designing with light. The sum total of its advantages makes this technology a milestone in lighting technology.
We use the superiority of LED in the development of new luminaires, but also in the technical perfection of existing luminaire series. In doing so, we go well beyond the applications normally expected on the market. We do this responsibly, competently and with a sense of proportion – but above all reliably. After all, reliability and a high standard of product quality are among our elementary values and convictions.In the development of our luminaires, therefore, thermo-management represents a great challenge. Efficiency and service life are already convincing and still improving. Module output and shape are variable and can be perfectly adapted to each luminaire. In addition to using high-grade components, we have also made design-related changes which contribute to favourable temperature conditions inside the luminaires.

More information about our LED technology


Finish
LED colour temperature
unshielded light 
LED Power supply unit A B C AC/DC
 
 
Location luminaires 
LED Power supply unit A B C AC/DC
 
no longer included in the current catalogue new in the range

Recessed luminaires for walls and staircases in use

Slider
Energy, Education and Experience Centre (EEZ), Aurich Learn more
Slider
Schloss Montabaur, Germany Learn more
Slider
Bossard Arena, Zug Learn more
Slider
Helsinki Music Centre, Helsinki Learn more
Slider
Siemens City, Vienna Learn more