Recessed wall luminaires

For flush or surface-mounted installation · Shielded light


For decades, BEGA luminaires from this series have been outstanding lighting construction details on numerous structures worldwide. We are constantly developing these luminaires and always perfectly match the construction and design to our LED technology. The extremely low maintenance requirements allow a new product concept with far easier and quicker installation. The electrical connection is comfortably established before installation in the structure. The installed luminaire is then mounted securely in the structure or in the installation housing with our BEGA mounting system. All installation dimensions are identical to those of the previous luminaires.

Two luminaire groups for the illumination of corridors, paths and staircases – both indoors and out.

The shielded luminaires direct the light downwards, and are fully shielded above the horizontal. The highest degree of illuminance is generated in the immediate vicinity of the luminaire. Luminaires with a high level of visual comfort for the uniform illumination of footpaths and surfaces with maximum glare suppression.

more

Protection class IP 65
BEGA Thermal Management ®

Cast aluminium, aluminium and stainless steel
BEGA Unidure ® coating technology
Safety glass
Reflector made of pure anodised aluminium

On/off or DALI-controllable power supply units

20-year availability guarantee for LED modules

The luminaire luminous flux and the luminaire connected wattage quoted in the table may change as a result of technical progress. On our website you will find data sheets with information on each luminaire concerning not only the current values but also the LED service life and the luminous flux in relation to the respective colour temperature.

Installation

You can choose between two installation housings and two plaster frames for the various installation situations. The luminaires can be surface-mounted as usual or they can be flush-mounted in plastered walls. 


Surface mounting in all kinds of cavity wall

The BEGA mounting system allows fast and convenient installation in lightweight construction walls without any accessories.

Surface mounting in unplastered brickwork

The construction of an recessed opening on site with the exact installation dimensions of the luminaire is required. An installation housing cannot be used.

Surface mounting in unplastered concrete

To make the recessed opening in concrete, we recommend using the type A installation housing.

Surface mounting in unplastered EWIS façades

The type B installation housing with different insulating elements allows an adjustment of the insulation depth from 120 - 200 mm.

Surface mounting in plastered brickwork

The type C plaster frame in conjunction with the type A installation housing makes it possible to compensate for different plaster thicknesses.

Surface mounting

in plastered concrete The type C plaster frame in conjunction with the type A installation housing makes it possible to compensate for different plaster thicknesses.

Surface mounting in plastered EWIS façades

The type C plaster frame in conjunction with the type B installation housing makes it possible to compensate for different plaster thicknesses.

Flush mounting in plastered brickwork

The type D plaster frame in conjunction with the type A installation housing makes it possible to compensate for different plaster thicknesses and allows the flush-mounting installation of the luminaires.

Flush mounting in plastered concrete

The type D plaster frame in conjunction with the type A installation housing makes it possible to compensate for different plaster thicknesses and allows the flush-mounting installation of the luminaires.

Flush mounting in plastered EWIS façades

The type D plaster frame in conjunction with the type B installation housing makes it possible to compensate for different plaster thicknesses and allows the flush-mounting installation of the luminaires.

Lighting technology

BEGA luminaires are available with different lighting parameters to provide efficient solutions for demanding lighting applications in a wide range of architectural situations. Additional components allow flexible and constructive lighting planning with BEGA luminaires.


LED technology

LED technology has redefined acquired standards and assessment criteria and created undreamt-of possibilities for designing with light. The sum total of its advantages makes this technology a milestone in lighting technology.
We use the superiority of LED in the development of new luminaires, but also in the technical perfection of existing luminaire series. In doing so, we go well beyond the applications normally expected on the market. We do this responsibly, competently and with a sense of proportion – but above all reliably. After all, reliability and a high standard of product quality are among our elementary values and convictions.In the development of our luminaires, therefore, thermo-management represents a great challenge. Efficiency and service life are already convincing and still improving. Module output and shape are variable and can be perfectly adapted to each luminaire. In addition to using high-grade components, we have also made design-related changes which contribute to favourable temperature conditions inside the luminaires.

More information about our LED technology


Planning examples

On the basis of our empirical values and the suggestions of architects and planners, we have compiled room situations for which lighting design is frequently required. In the following, we shall present possible illumination solutions for these architectural situations. It goes without saying that all technical lighting standards are complied with. In some cases, the degree of illuminance proposed by us may even exceed the standard. For us, the aesthetics of light and a high level of visual comfort are important criteria for such decisions. At the same time, the form and the size of the luminaires must fit into the architectural surroundings. For example, we often recommend larger models if a structure has large dimensions – even if smaller luminaires with lower output would be enough. In such cases, the degree of illuminance can be reduced to a suitable level by means of a light control system.


Pedestrian subway

A pedestrian subway between two building complexes should correspond to the style of the building architecture. In this case it is open, light architecture, which corresponds to daylight on account of large glass surfaces. This light effect should also be achieved in the underground connection. A graphic arrangement of wall luminaires with light emission on two sides thus accompanies the visitors...

learn more


Finish
LED colour temperature
LED Power supply unit A B C Recessed opening AC/DC
 
no longer included in the current catalogue new in the range

Recessed wall luminaires in use

Slider
Mercedes-Benz Museum, Stuttgart, Germany Learn more
Slider
Surgery building at Ulm University Hospital, Germany Learn more