was added to the project list.

Surface washers with outrigger arm

Asymmetrical light distribution

Surface washers with asymmetrical light distribution with outrigger arms for the large-scale illumination of façades and surfaces with high light output.

The infinite adjustability of the outrigger system and of the surface washers offers many different burning position settings to facilitate a multitude of lighting applications. Attention must be paid to the lamp manufacturer‘s instructions for the burning positions of the lamps. The scales on the outrigger arms and on the luminaire heads allow the simple and defined setting of the burning position. This is particularly important when several luminaires are arranged in a row.

Luminaires with high-quality lighting technology, with high structural strength and a high protection class for safe and cost-effective operation. Wherever lighting systems are exposed to high mechanical and climatic stresses and high light output is required.


Protection class IP 65

Cast aluminium, aluminium and stainless steel
Safety glass
Reflector made of pure anodised aluminium

The mounting height can be adjusted by ±1500 mm from the horizontal.
The light distribution can be adjusted exactly to the surface to be illuminated.
The luminaires can be installed with light emission either upwards or downwards.

The luminaire luminous flux and the luminaire connected wattage quoted in the table might change as a result of technical progress. On our website you will find data sheets with information on each luminaire concerning not only the current values but also the LED service life and the luminous flux in relation to the respective colour temperature.

LED colour temperature
  Lamp Base A B C D
24 509 K3   LED 61.0 W 6674 lm 350 105 2300 220
66 856   1 HI/HST-DE 150 W RX7s 350 105 2300 220
66 824   1 HI/HST-DE 250 W Fc 2 435 120 2400 220
66 827   1 HI/HST-DE 400 W Fc 2 560 150 2600 220