System bollards

Unshielded · Light emission 360°


As a modular system, BEGA system bollards enable luminaire heads and bollard tubes to be combined with various additional functions.

In lighting systems, luminaires of different heights or with additional functions, but with the same design and lighting technology, are often required. As part of our system bollard range, we offer bollard tubes with built-in floodlights, emergency lighting batteries, motion and light sensors, control modules, BEGA Vehicle Blocker ® drive-through protection, lockable sockets and charging module inserts for electric vehicles.

In addition to aluminium bollard tubes, we also offer component-free bollard tubes, made of a combination of cast aluminium and Accoya ® wood. Simply order the bollard head and your preferred bollard tube to go with it. The two modules can be quickly and easily connected to one another during installation.

These unshielded luminaire heads, from our modular system bollard range, emit their light symmetrically through 360° around the installation point. Luminaires for the illumination of pathways, squares and entrance areas.

more

Protection class IP 65
BEGA Thermal Management ®

Cast aluminium, aluminium and stainless steel
BEGA Unidure ® coating technology
Synthetic cylinder, white

On/off or DALI-controllable power supply units

These BEGA system bollards are equipped with an alignable mounting system. It can either be bolted onto a foundation provided by the customer, or onto a BEGA anchorage unit. Please order anchorage units as separate accessories.

20-year availability guarantee for LED modules

The luminaire luminous flux and the luminaire connected wattage quoted in the table may change as a result of technical progress. On our website you will find data sheets with information on each luminaire concerning not only the current values but also the LED service life and the luminous flux in relation to the respective colour temperature.

BEGA LED system bollards

We are pleased to present a modular bollard concept in the form of BEGA LED system bollards. The technical requirements to be met by luminaires are increasing all the time, especially in the planning of lighting systems of all shapes and sizes. BEGA LED system bollards are a modular system that enables the combination of luminaire heads and luminaire tubes with various additional functions.

learn more


Bollard heads

For the lighting function of the LED system bollards, you can choose from ten LED system bollard heads with different light distributions and light emissions to meet the requirements of the lighting situation in question. The LED system bollard heads are also available with different shapes and dimensions.

The LED system bollard head can quickly and easily be connected to the separately chosen LED system bollard tube during installation.

show all bollard heads


Bollard tubes

LED system bollard tubes offer the solutions for the frequently requested additional functions of bollards. They are available:

  • without components in two heights
  • made of Accoya® wood
  • with floodlight
  • with PIR motion and light sensor
  • with Zigbee control module
  • with a single emergency lighting battery
  • Drive-through protection up to 7.5 t · BEGA Vehicle Blocker®
  • with 2 250 V type F safety sockets behind a lockable door
  • with a lockable door · with or without installation inserts
  • with charging module insert for electric cars (type 2)
  • with one integral safety socket
  • as closing head without illumination function

show all bollard tubes



Lighting technology

BEGA luminaires are available with different lighting parameters to provide efficient solutions for demanding lighting applications in a wide range of architectural situations. Additional components allow flexible and constructive lighting planning with BEGA luminaires.


LED technology

LED technology has redefined acquired standards and assessment criteria and created undreamt-of possibilities for designing with light. The sum total of its advantages makes this technology a milestone in lighting technology.
We use the superiority of LED in the development of new luminaires, but also in the technical perfection of existing luminaire series. In doing so, we go well beyond the applications normally expected on the market. We do this responsibly, competently and with a sense of proportion – but above all reliably. After all, reliability and a high standard of product quality are among our elementary values and convictions.In the development of our luminaires, therefore, thermo-management represents a great challenge. Efficiency and service life are already convincing and still improving. Module output and shape are variable and can be perfectly adapted to each luminaire. In addition to using high-grade components, we have also made design-related changes which contribute to favourable temperature conditions inside the luminaires.

More information about our LED technology


Planning examples

On the basis of our empirical values and the suggestions of architects and planners, we have compiled room situations for which lighting design is frequently required. In the following, we shall present possible illumination solutions for these architectural situations. It goes without saying that all technical lighting standards are complied with. In some cases, the degree of illuminance proposed by us may even exceed the standard. For us, the aesthetics of light and a high level of visual comfort are important criteria for such decisions. At the same time, the form and the size of the luminaires must fit into the architectural surroundings. For example, we often recommend larger models if a structure has large dimensions – even if smaller luminaires with lower output would be enough. In such cases, the degree of illuminance can be reduced to a suitable level by means of a light control system.


Park

A walk through a park: The pedestrian walkway is flanked by LED bollards, whose unshielded light illuminates the path uniformly. An arrangement of luminaires along the edge of the path with spacing of 5.5 m apart is chosen for this. The bushes and trees are illuminated from the ground. For a homogeneous impression, large trees are illuminated with two in-ground luminaires. The colour temperature...

learn more


Finish
LED colour temperature
Bollard heads · unshielded · 360° 
LED Power supply unit A B AC/DC
Bollard tubes · without components 
Ø Connection box H
 
 
Bollard tubes · with components 
Ø Connection box H
 
no longer included in the current catalogue new in the range