0
0
Watch list
was added to the project list.
×

Wall luminaires

Unshielded


Unshielded luminaires in various sizes with LED and for fluorescent lamps. Open wall luminaires with rectangular glass cross-section and fascinating light graphics.

Hand-blown luminaire glass made of three-ply opal glass transforms these luminaires into elegant elements of interior design. And as solid and reliable lighting tools they will provide very cost-effective service over long operating periods.

Share

Matt aluminium glass support
Satin matt opal glass

LED luminaires: Luminaires with BEGA AC module, on/off power supply unit or DALI controllable power supply unit
Colour rendering index (CRI) > 90
50137.2 Colour rendering index (CRI) > 80

50137.2 Colour temperature 3000 K

The luminaire luminous flux and the luminaire connected wattage quoted in the table might change as a result of technical progress. On our website you will find data sheets with information on each luminaire concerning not only the current values but also the LED service life and the luminous flux in relation to the respective colour temperature.

Lighting technology

BEGA luminaires are available with different lighting parameters to provide efficient solutions for demanding lighting applications in a wide range of architectural situations.


BEGA AC module

We have developed a space-saving power supply module specifically for BEGA luminaires whose structural installation space does not allow the installation of an LED module and separate power supply unit.

The BEGA AC module is connected directly to the 230 V mains voltage and has a colour temperature of 3000 K and a colour rendering index (CRI) > 80. The information provided on Page 322 applies with respect to the service life criteria and replacement. BEGA AC modules can be dimmed with most modern phase dimmers from brand manufacturers.


LED technology

LED technology has redefined acquired standards and assessment criteria and created undreamt-of possibilities for designing with light. The sum total of its advantages makes this technology a milestone in lighting technology.
We use the superiority of LED in the development of new luminaires, but also in the technical perfection of existing luminaire series. In doing so, we go well beyond the applications normally expected on the market. We do this responsibly, competently and with a sense of proportion – but above all reliably. After all, reliability and a high standard of product quality are among our elementary values and convictions.In the development of our luminaires, therefore, thermo-management represents a great challenge. Efficiency and service life are already convincing and still improving. Module output and shape are variable and can be perfectly adapted to each luminaire. In addition to using high-grade components, we have also made design-related changes which contribute to favourable temperature conditions inside the luminaires.

More information about our LED technology


LED colour temperature
  Lamp Base A B C D AC/DC
50 137.2 K3   LED 12.0 W 880 lm AC module 100 175 90 35
50 138.2 K3   LED 15.0 W 1115 lm on/off 100 290 115 35
50 139.2 K3   LED 19.0 W 1571 lm DALI controllable 100 425 115 35
50 140.2 K3   LED 22.8 W 1840 lm DALI controllable 100 560 115 35
 
89 678.2   1 TC-SEL 11 W 2 G 7 100 290 115 35
89 679.2   1 TC-L 24 W 2 G 11 100 425 115 35
89 680.2   1 TC-L 36 W 2 G 11 100 560 115 35

Wall luminaires in use