Wall luminaires · Surface washers

Light emission on one side · Symmetrical, asymmetrical or flat beam light distribution


Luminaires with a wide range of applications in façade and area lighting.

• The symmetrical light distribution is used to illuminate façade and wall surfaces, whereby the mounting surface also acts as a reflection surface.

• The asymmetrical light distribution illuminates the ground surfaces in front of walls and façades. Here, the main focus is on the spatial illumination of the ground surfaces.

• The flat beam light distribution is used to illuminate ground surfaces in front of walls and façades. Here, the main focus is on the flat beam illumination of the surfaces near the building.

Economical luminaires with high luminous efficiency, low connected wattage and a long LED service life.

The luminaires can be installed in any burning position. This makes it possible to illuminate surfaces adjacent to the installation surface, such as ceilings, vaults, canopies and cantilever plates.

more

Protection class IP 65
BEGA Thermal Management ®

Cast aluminium, aluminium and stainless steel
BEGA Unidure ® coating technology
Safety glass
Reflector made of pure anodised aluminium

DALI-controllable power supply units

The luminaires can be installed in any burning position.

20-year availability guarantee for LED modules

The luminaire luminous flux and the luminaire connected wattage quoted in the table may change as a result of technical progress. On our website you will find data sheets with information on each luminaire concerning not only the current values but also the LED service life and the luminous flux in relation to the respective colour temperature.

Planning examples

On the basis of our empirical values and the suggestions of architects and planners, we have compiled room situations for which lighting design is frequently required. In the following, we shall present possible illumination solutions for these architectural situations. It goes without saying that all technical lighting standards are complied with. In some cases, the degree of illuminance proposed by us may even exceed the standard. For us, the aesthetics of light and a high level of visual comfort are important criteria for such decisions. At the same time, the form and the size of the luminaires must fit into the architectural surroundings. For example, we often recommend larger models if a structure has large dimensions – even if smaller luminaires with lower output would be enough. In such cases, the degree of illuminance can be reduced to a suitable level by means of a light control system.


Loading zone

Good light in a loading and manoeuvring zone guarantees safety and smooth working processes. Where there are several adjacent loading openings in a building, glare-free luminaires are therefore placed above and between the gates. Their asymmetrical very wide beam light distribution creates a degree of illuminance of about 50 lx. In addition, location luminaires are installed in the wall about...

learn more


Finish
LED colour temperature
Symmetrical light distribution 
LED Power supply unit A B C AC/DC
 
Asymmetrical light distribution 
LED Power supply unit A B C AC/DC
 
flat beam light distribution 
LED Power supply unit A B C AC/DC
no longer included in the current catalogue new in the range

Wall luminaires · Surface washers in use

Slider
Thermo Sensor Headquarters, Werne Learn more
Slider
Clouth Quarter, Cologne Learn more
Slider
FC Krasnodar football stadium, Russia Learn more