BEGA Vehicle Blocker® – Bollard tubes as drive-through protection · Square

as a supplement to BEGA bollard heads

Concrete-casting bollard tubes for foundations to be provided by the customer. Statically tested foundation plans for different foundation heights and application situations – certified for drive-through protection up to 1.5 t · 50 km/h – will be provided upon receipt of your order.


You will find more products of this type in the following series:

BEGA system bollards

A modular bollard concept

Technical data

Protection class IP 65

Cast aluminium, aluminium and stainless steel
BEGA Unidure® coating technology

The bollard tube and anchorage unit are designed for three different applications in conjunction with a foundation that must be constructed on site:

  1. Impact protection for an impact load of 10 kN in accordance with DIN 1991-1-7 (approximately equivalent to a passenger car with a weight of 1.5 t travelling at up to 10 km/h)
  2. Drive-through protection for a car passenger car with a max. weight of 1.5 t travelling at up to 50 km/h. Statically calculated and designed in accordance with PAS 68:2013 British Standard and European IWA 14-1:2013.



BEGA system bollards The modular bollard concept

We are pleased to present a modular bollard concept in the form of BEGA system bollards. The technical requirements that luminaires have to meet are increasing all the time, especially in the planning of lighting systems of all shapes and sizes. For example, it should be possible to switch luminaires by means of motion sensors, to secure traffic routes with emergency lighting in the event of a power failure, or to fit them with additional sockets or floodlights.

By means of a robust mechanism, we have made it possible to combine bollard heads and bollard tubes with integrated auxiliary components at will.

Simply order the luminaire head and your preferred luminaire tube to go with it. Both modules can be connected quickly and easily during installation.

learn more