In-ground luminaires

With small dimensions for flush-mounting installation

In-ground luminaires with compact dimensions, specially designed for flush installation in paved ground surfaces – indoors and out. Luminaires optionally available in a round or square design with convincing LED technology and impressive material quality.

The luminaires are mounted in a housing made of cast stainless steel on a foundation provided by the customer that absorbs the pressure loads. The luminaires can be driven over by vehicles with pneumatic tyres.

Technical data

Pressure load 2000 kg


Protection class IP 68 · 10 m
BEGA Thermal Management®

Trim ring made of stainless steel
Luminaire housing made of cast stainless steel
Safety glass
Reflector made of pure anodised aluminium

A separate 24 V DC power supply unit with A = 75 mm is required to operate the luminaires.

Water stop · Connecting cable

On request, the luminaires are available in the light colours green, blue, amber and red.

20-year availability guarantee for LED module

B = Ø recessed opening

The luminaire luminous flux and the luminaire connected wattage quoted in the table may change as a result of technical progress. On our website you will find data sheets with information on each luminaire concerning not only the current values but also the LED service life and the luminous flux in relation to the respective colour temperature.

Pressure load 2000 kg


Protection class IP 68 · 10 m
BEGA Thermal Management®

Trim ring made of stainless steel
Luminaire housing made of cast stainless steel
Safety glass
Reflector made of pure anodised aluminium

A separate 24 V DC power supply unit with A = 75 mm is required to operate the luminaires.

Water stop · Connecting cable

On request, the luminaires are available in the light colours green, blue, amber and red.

20-year availability guarantee for LED module

B = Ø recessed opening

The luminaire luminous flux and the luminaire connected wattage quoted in the table may change as a result of technical progress. On our website you will find data sheets with information on each luminaire concerning not only the current values but also the LED service life and the luminous flux in relation to the respective colour temperature.

View planning examples

Historical façade
Various different luminaires are used to illuminate historical façades. Beginning on the ground floor, arcades are illuminated with in-ground floodlights. Here it is important to make sure that the luminaires can stand up to being driven over by car tyres. Depending on the version of the luminaires, pressure loads of up to 5000 kg are possible. Between the floors, the house has ledges from where slim adjustable façade floodlights can illuminate the building. Their light distribution is symmetrical. 

Spa
In a spa zone, the illumination makes a significant contribution towards the well-being of the guests. Alternating zones with dimmed light and zones accentuated with illumination are ideal for the relaxation of the guests. At the same time, the lighting system must be able to illuminate the rooms clearly for cleaning purposes. On account of the climatic conditions in such facilities, only luminaires with high protection classes are installed. In the whirlpool cubes, wall luminaires cast wide-beam light onto the ceiling, and this light is reflected softly back into the room. The pools are fitted with underwater luminaires whose light colour can be adjusted variably via RGBW. Between the cubes, in-ground floodlights accentuate the shower area. This light effect is repeated on the front pillars using in-ground floodlights. In the room, soft light falls from the ceiling via flat square luminaires. Recessed wall luminaires line the paths at a height of 40 cm, thus creating safety and structure. Recessed ceiling downlights are installed in the outdoor terrace covering roof.

Image gallery