In-ground luminaires with a shallow installation depth

For flush-mounted installation

Location luminaires and floodlights specially for flush-mounting installation in paved ground surfaces.

Luminaires with convincing lighting technology and impressive material quality. The luminaire design made of stainless steel and cast stainless steel is suitable for very high load applications.

Due to their low height, these luminaires are particularly suitable for areas where only a limited installation depth is available, e.g. parking decks or suspended ceilings, both indoors and out.

Diffuser lenses that alter the light distribution are available as accessories for these floodlights. Please order accessories separately.

The luminaires can be driven over by vehicles with pneumatic tyres.

Technical data

Pressure load 3000 kg


Protection class IP 68 · 10 m
BEGA Thermal Management®

Trim ring and luminaire housing made of stainless steel and cast stainless steel
Safety glass
Floodlights with reflectors made of pure anodised aluminium

BEGA Ultimate Driver® · on/off or DALI-controllable

Water stop · Connecting cable

Before the luminaires are installed, the customer must lay a foundation that will absorb the pressure load of the luminaires.

When the glass is wet, there may be a risk of slipping. For walkable public areas, we recommend skid-blocking glass in accordance with DIN 51130  R 13. R after the article number, we can supply all luminaires with skid-blocking glass. This increases the dispersion of the light distribution.

On request, the luminaires are available in the light colours green, blue, amber and red.

The luminaire luminous flux and the luminaire connected wattage quoted in the table may change as a result of technical progress. On our website you will find data sheets with information on each luminaire concerning not only the current values but also the LED service life and the luminous flux in relation to the respective colour temperature.

Image gallery