Er ikke længere en del af sortimentet

Storfladearmaturer

Lofts- og vægarmaturer
Dette produkt er ikke længere i det aktuelle sortiment

Bemærk venligst, at dette produkt ikke længere er tilgængeligt. Du kan stadig få adgang til alle tekniske data og downloads ved at klikke på de respektive tabellinjer. Vi står naturligvis til rådighed for serviceforespørgsler - du er velkommen til at kontakte os.

BEGA storfladearmaturer er armaturer til ekstremt stort areal og ensartet lys. Med store mål og imponerende lyseffekt åbner disse armaturer nye og kreative designmuligheder inden for arkitekturen, der kan bruges på mange områder.

Både som et enkelt armatur og som et arrangement af forskellige armaturstørrelser udfolder de deres imponerende lyseffekt. De er lysende designelementer, der ud over deres lysfunktion også kan sætte deres præg på vægge eller lokaler.

Alle armaturer kan styres via DALI, så lyset kan tilpasses perfekt til den respektive belysningssituation. Den lange levetid og gode økonomi for vores LED-moduler og alle tekniske komponenter reducerer vedligeholdelses- og driftsomkostningerne yderligere.

Tekniske data

Tæthedsklasse IP 65 BEGA Thermal Management ®

Støbt aluminium, aluminium og rustfrit stål Belægningsteknologi BEGA Unidure ® Sikkerhedsglas

Netdele DALI-styrbar

20 års efterkøbsgaranti for LED-modulet

Se planlægningseksempler

Commercial building entrance
The covered area in front of a commercial building is illuminated from a great height with efficient downlights. The focus is placed on the square pillars supporting the roof using very narrow beam in-ground floodlights on the front side. On the sides and at the rear, they benefit from the light of the downlights. A roof panel projecting over the entrance is fitted with recessed ceiling luminaires to emphasise the way into the building. The illumination level here is about 100 lx. The general lighting of the interior space and of the commercial rooms is effected with large-format, very flat ceiling luminaires. 

Spa
In a spa zone, the illumination makes a significant contribution towards the well-being of the guests. Alternating zones with dimmed light and zones accentuated with illumination are ideal for the relaxation of the guests. At the same time, the lighting system must be able to illuminate the rooms clearly for cleaning purposes. On account of the climatic conditions in such facilities, only luminaires with high protection classes are installed. In the whirlpool cubes, wall luminaires cast wide-beam light onto the ceiling, and this light is reflected softly back into the room. The pools are fitted with underwater luminaires whose light colour can be adjusted variably via RGBW. Between the cubes, in-ground floodlights accentuate the shower area. This light effect is repeated on the front pillars using in-ground floodlights. In the room, soft light falls from the ceiling via flat square luminaires. Recessed wall luminaires line the paths at a height of 40 cm, thus creating safety and structure. Recessed ceiling downlights are installed in the outdoor terrace covering roof.

Waiting zone
As a rule, there is a quiet atmosphere in waiting zones. Some people are reading or sleeping, others are busy with their laptop or smartphone. The illumination of the entire area is effected using downlights. Due to their thick, partially frosted crystal glass, most of the light is emitted directly downwards onto the floor. An average of 150 lx is reached at floor level. The remaining light is refracted by the edge of the glass and is diffused through the matt finish. In this way, the light is also distributed vertically into the room. In addition, flat, square wall luminaires emit soft light.

Vis flere planlægningseksempler

Billedgalleri