Standalone charging units

These charging units for electric vehicles are stand-alone solutions. Their slim design and small dimensions allow flexible wall installation even in areas with very narrow structural elements such as pillars or steel girders. With these dimensions, use in niches is usually possible without any problems.

Alternatively, a column solution is available for floor mounting. Here, the loading unit is integrated into a robust tube.

Technical data

Cast aluminium, aluminium and stainless steel BEGA Unidure® coating technology

Housing colour graphite

Protection class IP 54

Maximum charging power 22 kW For any electric vehicle with IEC 62196 Type 2 plug

Compliant with calibration regulations

Protection class IP 54

Aluminium BEGA Unidure® coating technology

Housing colour graphite

For every e-vehicle with type 2 plug according to IEC 62196 Including Terminal box 71 084 for the luminaire connection

85 079 for type 2 plugs according to IEC 62196 For operation in compliance with calibration law in Germany For the safe electrical connection of the charging unit, we recommend the separately ordered Plenum box 71 306 with residual current circuit breaker and overvoltage protection

85 377 for type 2 plugs according to IEC 62196 with shutter socket For operation in France, Belgium, Italy, Switzerland, Austria and the UK

Please note: The use of the Junction box 71 306 with residual current circuit breaker and overvoltage protection or an equivalent solution provided by the customer is required for operation.

These BEGA charging stations are equipped with an adjustable mounting system. It can be screwed be screwed onto a foundation provided by the customer or onto a BEGA base plate. Please order grounding pieces separately as a supplementary part.

Download instruction manual

Image gallery