Bollard tubes with connection compartment

as a supplement to BEGA bollard heads

Bollard tubes with connection compartment with three integral 250 V type F (German/European system) safety sockets, three 250 V CEE sockets, two 400 V CEE sockets, eight C 16 A automatic cutouts and residual current devices, plus a lockable door. Optionally available without installation inserts.

You will find more products of this type in the following series:

BEGA system bollards

Modular bollard concept

Technical data

Protection class IP 65

Cast aluminium, aluminium and stainless steel BEGA Unidure® coating technology

Lockable door

84 095  with 2 CEE sockets 16 A · 400 V AC 3 CEE sockets 16 A · 250 V AC 3 Safety sockets type F 16 A · 250 V AC 1 Residual current device 40 A · 30 mA 2 Automatic cutouts C 16 A 3-pole 6 Automatic cutouts C 16 A 1-pole

84 096  with 2 fuse boxes, 8-part

BEGA bollard tubes are bolted with a mounting plate onto a foundation provided by the customer or an anchorage unit made of hot-dip galvanised steel. The mounting system can be used to align the bollard tube. Anchorage units are accessories and must be ordered separately.

BEGA system bollards The modular bollard concept

We are pleased to present a modular bollard concept in the form of BEGA system bollards. The technical requirements that luminaires have to meet are increasing all the time, especially in the planning of lighting systems of all shapes and sizes. For example, it should be possible to switch luminaires by means of motion sensors, to secure traffic routes with emergency lighting in the event of a power failure, or to fit them with additional sockets or floodlights.

By means of a robust mechanism, we have made it possible to combine bollard heads and bollard tubes with integrated auxiliary components at will.

Simply order the luminaire head and your preferred luminaire tube to go with it. Both modules can be connected quickly and easily during installation.

learn more