Ceiling and wall luminaires

Protection class IP 44


Ceiling and wall luminaires with light shielded to the side by a metal shield. The result is an impressive contrast between the shining glass and the shield. Part of the light is directed at the back onto the installation surface so that the luminaires appear to hover.

Indoor luminaires in various sizes with LED module or LED lamps for E 27 screw base. Luminaires which, thanks to their IP 44 protection class, are also ideal for bathroom lighting in accordance with VDE 0100.

Protection class IP 44

Satin matt opal glass or impact-resistant, translucent synthetic cover

Luminaires with LED module:
On/off or DALI-controllable power supply units · BEGA Thermal Management ®
Colour rendering index (CRI) > 90
Colour temperature 3000 K or 4000 K
20-year availability guarantee for LED modules

We supply the luminaires with E 27 screw base complete with the number of corresponding LED lamps shown in the table.
Colour rendering index (CRI) > 80
Colour temperature 2700 K or 3000 K

For applications where glass cannot be used: Luminaires in this series can be ordered with a translucent, impact-resistant synthetic cover by adding a P to the end of the article number.

The luminaire luminous flux and the luminaire connected wattage quoted in the table may change as a result of technical progress. On our website you will find data sheets with information on each luminaire concerning not only the current values but also the LED service life and the luminous flux in relation to the respective colour temperature.

Finish
LED colour temperature
Luminaire cover
Lamp Base A B C AC/DC
 
no longer included in the current catalogue new in the range