Pole-top luminaires and side-mounted pole-top luminaires

Asymmetrical or asymmetrical flat beam light distribution

These luminaires are part of a group with a performance spectrum that covers all street, square and urban lighting applications. They are available as pole-top luminaires or side-mounted pole-top luminaires. There are two types of light distribution to choose from:

  • asymmetrical light distribution for spatially deep illumination of spaces, squares and car parks, or
  • asymmetrical flat beam light distribution that is particularly suitable for street lighting in compliance with EN 13201.

Ready-to-install pole-top luminaires for single or double arrangements and side-mounted pole-top luminaires for bracket poles.

These luminaires are optionally available with BEGA BugSaver technology for controlling the colour temperature between 3000 and 1800 Kelvin – for additional environmental protection in natural surroundings.

Technical data

Protection class IP 66
Safety class II
BEGA Thermal Management®

Cast aluminium, aluminium and stainless steel
BEGA Unidure® coating technology
Anti-glare single-pane safety glass
Miro® reflectors made of highly reflective pure aluminium

Luminous flux in the upper half-space < 1%

Luminaires in a double arrangement and side-mounted pole-top luminaires:
Attack angle adjustable to 0° or 15°
Can be opened without the use of tools

BEGA Ultimate Driver® · DALI-controllable

20-year availability guarantee for LED module

The luminaire luminous flux and the luminaire connected wattage quoted in the table may change as a result of technical progress. On our website you will find data sheets with information on each luminaire concerning not only the current values but also the LED service life and the luminous flux in relation to the respective colour temperature.

Protection class IP 66
Safety class II
BEGA Thermal Management®

Cast aluminium, aluminium and stainless steel
BEGA Unidure® coating technology
Anti-glare single-pane safety glass
Miro® reflectors made of highly reflective pure aluminium

Luminous flux in the upper half-space < 1%

Luminaires in a double arrangement and side-mounted pole-top luminaires:
Attack angle adjustable to 0° or 15°
Can be opened without the use of tools

BEGA Ultimate Driver® · DALI-controllable

20-year availability guarantee for LED module

The luminaire luminous flux and the luminaire connected wattage quoted in the table may change as a result of technical progress. On our website you will find data sheets with information on each luminaire concerning not only the current values but also the LED service life and the luminous flux in relation to the respective colour temperature.

Protection class IP 66
Safety class II
BEGA Thermal Management®

Cast aluminium, aluminium and stainless steel
BEGA Unidure® coating technology
Anti-glare single-pane safety glass
Miro® reflectors made of highly reflective pure aluminium

Luminous flux in the upper half-space < 1%

Can be opened without the use of tools

BEGA Ultimate Driver® · DALI-controllable

20-year availability guarantee for LED module

The luminaire luminous flux and the luminaire connected wattage quoted in the table may change as a result of technical progress. On our website you will find data sheets with information on each luminaire concerning not only the current values but also the LED service life and the luminous flux in relation to the respective colour temperature.

View planning examples

Roundabout
Roundabouts form typical conflict zones in road lighting in accordance with DIN EN 13 201. The roundabout must be illuminated if the roads leading to it are also illuminated. A degree of illuminance of 20 lx on the carriageway in the roundabout, without pedestrian crossings, represents good illumination. On driveways, the illumination level should be gradually increased from 5 lx to 20 lx based on the permitted speed. The transition should be gentle in order to keep the contrast as low as possible and to allow the human eye to adapt quickly. A slight change in light colour compared to the road lighting also increases the level of attention.

Loading zone
Good light in a loading and manoeuvring zone guarantees safety and smooth working processes. Where there are several adjacent loading openings in a building, glare-free luminaires are therefore placed above and between the gates. Their asymmetrical very wide beam light distribution creates a degree of illuminance of about 50 lx. In addition, location luminaires are installed in the wall about half a metre above the ground in order to facilitate reversing. The entire company grounds are illuminated from a height of 8 m with pole-top luminaires, guaranteeing a basic illumination level of 20 lx.

Car park
A car park (32m x 50m) with a medium volume of traffic at an office complex or a department store should be illuminated with at least 10lx in order to allow easy orientation. A reduction of the illumination level to 5 lx is recommended at night. As soon as persons enter the car park, or cars drive in, the degree of illuminance is raised to 10lx again. Pole-top luminaires with precision reflectors are ideal for illuminating the area. With a pole height of 5 m and luminaire spacing of 21 m, three pole-top luminaires on the two long sides of the car park and three double pole-top luminaires of the same type in the centre of the useful area are sufficient to ensure uniform light distribution and the required degree of illuminance.

Image gallery

Discover related Products